Join 60,000+ competitive exam aspirants
RCC poles usually has the span of
250 to 400 m
100 to 150 m
50 to 100 m
25 to 50 m
100 to 150 m
Reinforced Cement Concrete (RCC) poles are widely used in electrical distribution systems, typically for low and medium voltage lines (up to 33 kV). These poles are designed to have a span ranging between 100 to 150 meters to maintain mechanical stability and safe ground clearance for the overhead conductors.
Reinforced Cement Concrete (RCC) poles are widely used in electrical distribution systems, typically for low and medium voltage lines (up to 33 kV). These poles are designed to have a span ranging between 100 to 150 meters to maintain mechanical stability and safe ground clearance for the overhead conductors.
Sag=8TwL2тАЛ тАФ where w is weight per unit length, L is span, and T is tension
LmaxтАЛтИЭTтАЛ тАФ indicating span is proportional to the square root of conductor tension
The span length of a transmission or distribution line is determined by the mechanical strength of the support structure and the sag characteristics of the conductors. RCC poles provide a rigid support that allows for longer spans compared to wooden poles but shorter than steel towers; the 100-150m limit prevents excessive stress on the pole structure and maintains the required conductor clearance from the ground per electrical safety regulations.
RCC poles are preferred for distribution due to their long life and low maintenance.
The span is limited by the bending moment induced on the pole by wind and conductor tension.
Higher spans are possible with lattice steel towers but not with standard RCC poles.
High mechanical strength
Longer service life compared to wood
Negligible maintenance requirements
Corrosion resistance
Heavy weight makes transportation difficult
Prone to cracking under excessive loading
Requires specialized equipment for erection
Low voltage (LV) distribution networks
11 kV and 33 kV rural electrification
For 11 kV lines, the typical span is 100 meters.
For 33 kV lines, the span can be pushed to 150 meters depending on conductor size.
Wooden poles usually have spans of 50-100m, whereas steel towers can exceed 300m.
B is correct тАФ RCC poles are engineered for typical distribution spans of 100 to 150 meters.
Remember that span length is inversely proportional to sag; if you increase the span beyond 150m for an RCC pole, the required sag to keep tension within limits would exceed safe ground clearance.