Join 60,000+ competitive exam aspirants
Rotameter is used for measuring
Fluid discharge
Fluid density
Fluid viscosity
All of above
Fluid discharge
A rotameter is a variable area flowmeter used to measure the volumetric flow rate of liquids and gases in a closed tube. It operates on the principle of variable area, where the fluid flow pushes a float upward in a tapered tube, increasing the annular area until the forces on the float reach equilibrium.
A rotameter is a variable area flowmeter used to measure the volumetric flow rate of liquids and gases in a closed tube. It operates on the principle of variable area, where the fluid flow pushes a float upward in a tapered tube, increasing the annular area until the forces on the float reach equilibrium.
Q=CdтАЛAaтАЛ╧БAfтАЛ2gVfтАЛ(╧БfтАЛтИТ╧Б)тАЛтАЛ тАФ Volumetric flow rate where AaтАЛ is the annular area, VfтАЛ is float volume, ╧БfтАЛ is float density, and ╧Б is fluid density.
The float inside the tapered glass or metal tube moves vertically based on the flow rate. The position of the float is determined by the balance between the downward gravitational force (weight of the float minus buoyancy) and the upward drag force exerted by the fluid flow. Because the tube is tapered, the flow area A increases as the float rises, allowing for a linear scale calibration proportional to the volumetric discharge Q.
Rotameter is a constant pressure drop, variable area flowmeter.
The float position indicates the instantaneous flow rate.
It is primarily used for pipe flow measurement in industrial processes.
The flow rate is inversely proportional to the density of the fluid for gas applications.
Simple construction with no external power source required.
Direct visual reading of flow rate.
Low pressure drop across the device.
Can handle low flow rates accurately.
Must be mounted vertically for gravity-based operation.
Glass tubes are fragile and prone to damage under high pressure.
Readings can be affected by changes in fluid viscosity and density.
Limited to small to medium pipe diameters.
Monitoring fluid flow in chemical and pharmaceutical plants.
Measuring gas flow in laboratories and HVAC systems.
Coolant water flow monitoring for industrial machinery.
Option B (Fluid density) and Option C (Fluid viscosity) are physical properties that influence the calibration of the rotameter, but they are not the parameters measured by the instrument itself.
Standard industrial rotameters use a scale graduated in flow units like LPM (Liters Per Minute) or SCFM (Standard Cubic Feet per Minute).
A is correct тАФ The rotameter is specifically designed to measure the volumetric discharge of fluids flowing through a conduit.
In competitive exams, remember that Rotameter is a 'Variable Area' meter, whereas Venturimeter and Orifice meter are 'Constant Area, Variable Pressure Drop' meters.