Join 60,000+ competitive exam aspirants
Skin effect in conductor results in
Increase in DC resistance
Decrease in AC resistance
Increase in AC resistance
None of above
Increase in AC resistance
The skin effect is a phenomenon in AC conductors where the current density is highest near the surface and decreases exponentially towards the center. This reduction in the effective cross-sectional area used for current flow increases the effective resistance of the conductor compared to its DC resistance.
The skin effect is a phenomenon in AC conductors where the current density is highest near the surface and decreases exponentially towards the center. This reduction in the effective cross-sectional area used for current flow increases the effective resistance of the conductor compared to its DC resistance.
RACтАЛ>RDCтАЛ тАФ Fundamental relationship showing AC resistance is always higher than DC resistance due to skin effect
╬┤=╧Й╬╝2╧БтАЛтАЛ тАФ Skin depth equation showing distance current penetrates into the conductor
As alternating current flows through a conductor, it creates a time-varying magnetic field that induces eddy currents. These eddy currents oppose the flow of current in the center of the conductor and reinforce it at the surface, effectively 'pushing' the charge carriers toward the conductor's skin. Consequently, the ohmic resistance (RACтАЛ) becomes higher than the DC resistance (RDCтАЛ), especially at higher frequencies.
Skin effect is directly proportional to frequency, conductor diameter, and permeability.
It is negligible at DC (f = 0) and low-frequency AC (e.g., 50 Hz/60 Hz) for small conductors.
The effective resistance increases as the penetration depth (skin depth) decreases.
Transmission lines often use ACSR (Aluminum Conductor Steel Reinforced) to mitigate these effects and provide mechanical strength.
Used in induction heating applications to heat only the surface of materials
Helps in designing high-frequency wave-guides and antennas
Increased power losses (I┬▓с┤┐) in transmission lines due to higher resistance
Reduced efficiency in heavy current-carrying conductors at power frequencies
Power transmission systems
Induction hardening of steel
High-frequency circuit design
Option A is incorrect because DC resistance is determined solely by geometry and resistivity (╧БAlтАЛ), independent of frequency.
Option B is incorrect because AC resistance always increases, it never decreases due to the skin effect.
The skin effect becomes more pronounced at higher frequencies (>1 kHz) and for larger conductor cross-sections.
C is correct тАФ Skin effect reduces the effective cross-sectional area through which the current flows, thereby increasing the AC resistance of the conductor.
Always remember that skin effect only affects AC conductors; DC current utilizes the entire cross-section of the conductor uniformly.