Join 60,000+ competitive exam aspirants
Skin effect in transmission line is due to
Supply frequency
Self-inductance of conductor
High sensitivity of material in the center
Both (a) and (b)
Self-inductance of conductor
The skin effect is the tendency of an alternating current (AC) to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This phenomenon is primarily caused by the internal magnetic flux linkage within the conductor, which creates a non-uniform impedance profile.
The skin effect is the tendency of an alternating current (AC) to become distributed within a conductor such that the current density is highest near the surface and decreases exponentially towards the center. This phenomenon is primarily caused by the internal magnetic flux linkage within the conductor, which creates a non-uniform impedance profile.
╬┤=╧Аf╬╝╧Г1тАЛтАЛ тАФ Skin depth equation showing dependency on frequency (f), permeability (╬╝), and conductivity (╧Г)
XLтАЛ=2╧АfL тАФ Inductive reactance responsible for pushing current to the surface
When AC flows through a conductor, the current creates internal magnetic field lines that encircle the current filaments. Filaments near the center of the conductor are linked by more magnetic flux than those near the surface, resulting in a higher internal self-inductance at the center. This higher inductive reactance (XLтАЛ=2╧АfL) at the center causes the current to migrate toward the outer surface where the total impedance is lower.
Skin effect increases the effective resistance of the conductor.
It is more pronounced in conductors with large diameters and high permeability materials like steel.
The depth of penetration decreases as the supply frequency increases.
In DC systems, the current distribution is uniform, so skin effect is zero.
Useful in specialized applications like induction heating.
Reduces current flow through the core, which can be useful in certain high-frequency components.
Increases I2R power loss in power transmission lines.
Inefficient utilization of the conductor cross-section at higher frequencies.
Transmission line design (use of ACSR conductors to minimize material at the center).
High-frequency radio antenna design.
Induction heating furnaces.
ACSR (Aluminum Conductor Steel Reinforced) is widely used; the central steel core carries little current, which is intentional to mitigate skin effect losses.
Option B is correct because self-inductance creates the reactance gradient; Option A is correct because reactance is frequency-dependent.
D is correct тАФ The skin effect is a combined result of supply frequency-dependent reactance and the internal self-inductance of the conductor.
Always remember that skin effect is negligible at 50Hz for thin conductors but becomes a critical design parameter for EHV (Extra High Voltage) transmission lines.