Join 60,000+ competitive exam aspirants
Specification of ACSR conductor with 7 strands of steel and 24 strands of aluminum is
24/7
7/24
7/31
31/7
24/7
ACSR (Aluminum Conductor Steel Reinforced) conductors are specified using the format AluminumStrands/SteelStrands. In this case, with 24 strands of aluminum and 7 strands of steel, the standard designation is 24/7.
ACSR (Aluminum Conductor Steel Reinforced) conductors are specified using the format AluminumStrands/SteelStrands. In this case, with 24 strands of aluminum and 7 strands of steel, the standard designation is 24/7.
Total┬аStrands=NAlтАЛ+NSteelтАЛ тАФ Total number of strands in the composite conductor
DiametertotalтАЛ=DsteelтАЛ+2├ЧDAlтАЛ├Чlayers тАФ Simplified estimation of conductor diameter
ACSR conductors utilize a central core of galvanized steel strands to provide mechanical strength, while the outer layers of aluminum strands provide high electrical conductivity. The configuration is written as NAlтАЛ/NSteelтАЛ to denote the composite construction, where the ratio does not represent a mathematical division but a structural count.
ACSR stands for Aluminum Conductor Steel Reinforced.
Steel strands provide tensile strength, allowing for longer spans between transmission towers.
Aluminum strands carry the bulk of the current due to the skin effect.
The specification format X/Y is universal for identifying strand counts in power engineering.
High strength-to-weight ratio
Increased span length reducing tower costs
Low electrical resistance
Subject to galvanic corrosion if not protected
Requires complex installation for sag management
High Voltage (HV) transmission lines
Extra High Voltage (EHV) overhead lines
Distribution systems requiring long spans
Standard sizes of ACSR conductors are often denoted by code names like 'Dog', 'Wolf', or 'Panther' in Indian standards (IS 398).
The number of aluminum strands can be calculated by 3n2тИТ3n+1 for a circular cross-section, where n is the number of layers.
A is correct тАФ The standard notation for ACSR conductors is always (Number of Aluminum strands)/(Number of Steel strands), which is 24/7 for this case.
In exams, always look for the Aluminum count first; if a conductor has many layers, ensure you verify the naming convention doesn't imply total strands (e.g., total = 31).