Join 60,000+ competitive exam aspirants
Spinning reserve is
Reserve generating capacity which is available for service but not in operation
Reserve generating capacity which is connected to the bus and is ready to take load
Reserve generating capacity which is in operation but is not in service
None of above
Reserve generating capacity which is connected to the bus and is ready to take load
Spinning reserve refers to the extra generating capacity that is already synchronized to the grid and operating in parallel with the load. This capacity is immediately available to be ramped up to meet sudden increases in load or to compensate for the sudden loss of another generating unit.
Spinning reserve refers to the extra generating capacity that is already synchronized to the grid and operating in parallel with the load. This capacity is immediately available to be ramped up to meet sudden increases in load or to compensate for the sudden loss of another generating unit.
PreserveтАЛ=PmaxrтАЛatingтАЛтИТPactualoтАЛutputтАЛ тАФ The power available as spinning reserve for a single unit
Generators in a power system are synchronized to a common bus frequency. By operating these units at less than their maximum continuous rating (MCR), a portion of their capacity is held in 'reserve'. If a disturbance occurs, the governors or Automatic Generation Control (AGC) systems of these units respond instantly to increase power output without requiring time-consuming startup or synchronization procedures.
Must be synchronized to the grid frequency.
Essential for maintaining frequency stability during contingencies.
Limited by the ramp rate of the generating units.
Part of the broader 'Operating Reserve' category.
Provides near-instantaneous response to load fluctuations.
Ensures grid frequency stability.
Prevents load shedding during minor generator failures.
Increased operating costs due to part-load efficiency losses.
Higher fuel consumption compared to operating at base load.
Grid frequency control.
Emergency response in interconnected power systems.
Integration of intermittent renewable energy sources.
Spinning reserve is distinct from 'Cold Reserve' or 'Standby Reserve', which refer to units that are shut down and require significant startup time.
Option A describes Cold Reserve, while Option C is logically inconsistent as a generator in operation must be in service.
B is correct тАФ Spinning reserve represents generators connected to the grid and synchronized, maintaining a partial load to provide immediate power adjustments.
Always remember that 'spinning' implies the turbine-generator set is physically rotating at synchronous speed, while 'cold' reserves are at a standstill.