Join 60,000+ competitive exam aspirants
Storage requirement can be determined from
Hydrograph
Flow-duration curve
Mass curve
Either by hydrograph or by mass curve
Either by hydrograph or by mass curve
Storage requirement in hydro power systems is determined by assessing the cumulative inflow and outflow over a period. Both Mass Curves (Rippl's diagram) and Hydrographs serve as graphical tools to determine the necessary storage capacity to meet demand fluctuations.
Storage requirement in hydro power systems is determined by assessing the cumulative inflow and outflow over a period. Both Mass Curves (Rippl's diagram) and Hydrographs serve as graphical tools to determine the necessary storage capacity to meet demand fluctuations.
VstorageтАЛ=тИлt1t2тАЛ(QdemandтАЛтИТQinflowтАЛ)dt тАФ Volume required based on hydrograph
S=Max(Vcumulative_demandтАЛтИТVcumulative_inflowтАЛ) тАФ Storage from mass curve analysis
The Mass Curve plots cumulative volume (or discharge) against time, where the vertical distance between the inflow mass curve and the demand curve represents the required storage. Alternatively, a hydrograph provides the rate of flow over time; by integrating the difference between inflow and outflow hydrographs, the required reservoir capacity can be calculated.
Mass curve is the most common and widely used method for reservoir capacity determination.
Storage is required to bridge the gap between variable inflow (hydrology) and constant/variable demand (load).
Hydrographs are essential for peak flood analysis and short-term operational discharge planning.
Mass curves provide a simple visual representation for long-term planning.
Hydrographs offer precise temporal data for flood control and peak flow management.
Both methods are sensitive to the accuracy of historical streamflow data.
Mass curves do not inherently account for evaporation or seepage losses without explicit modification.
Reservoir capacity sizing for hydroelectric stations.
Water supply management and irrigation planning.
Flood control system design.
Flow-duration curves (Option B) are used to determine the power potential and turbine capacity, but they do not directly indicate the volume of storage required to buffer supply/demand discrepancies.
A mass curve is defined as the plot of the cumulative volume of water against time.
D is correct тАФ Storage capacity for reservoirs is determined using either the Mass Curve method or by integrating flow differences derived from Hydrographs.
Always remember: Mass Curve = Volume (cumulative), Hydrograph = Discharge (rate). If asked for 'storage capacity', focus on volume-based methods.