Join 60,000+ competitive exam aspirants
Sun tracking system is required in the case of
Cylindrical and parabolic collector
Flat plate collector
Both (a) and (b)
None of above
Cylindrical and parabolic collector
Sun tracking systems are essential for concentrating solar collectors because they require high-precision alignment with the solar disc to maintain focus on the absorber tube or receiver. Unlike stationary collectors, these systems must continuously track the sun's motion across the sky to maximize energy capture.
Sun tracking systems are essential for concentrating solar collectors because they require high-precision alignment with the solar disc to maintain focus on the absorber tube or receiver. Unlike stationary collectors, these systems must continuously track the sun's motion across the sky to maximize energy capture.
IbeamтАЛ=InтАЛтЛЕcos(╬╕) тАФ represents the beam radiation incident on a surface where ╬╕ is the angle of incidence.
C=AreceiverтАЛAapertureтАЛтАЛ тАФ defines the geometric concentration ratio required to maintain high temperature.
The principle relies on the optical requirement that for beam radiation to be focused onto a small target area (the absorber), the angle of incidence must be minimized or kept constant. By utilizing light sensors or astronomical algorithms, the tracking mechanism adjusts the collector orientation, ensuring the incident rays remain perpendicular to the aperture plane or parallel to the optical axis of the parabolic dish/trough.
Tracking is mandatory for collectors with high concentration ratios to ensure the focus stays on the absorber.
Flat plate collectors use diffuse and beam radiation, hence tracking is not typically cost-effective.
Tracking systems improve the annual energy output of concentrating systems by 30-40%.
Tracking can be single-axis (east-west or north-south) or dual-axis.
Significantly higher fluid outlet temperatures.
Higher efficiency in converting solar energy to thermal/electrical power.
Increased capital cost and mechanical complexity.
Higher maintenance requirements due to moving parts.
Parabolic Trough Collectors (PTC).
Central Receiver Power Plants (Solar Towers).
Dish-Stirling Systems.
Option B (Flat plate collector) does not focus light and works effectively with diffuse radiation, making tracking unnecessary.
Tracking systems are generally classified into active (sensor-based) and passive (thermal expansion-based) systems.
A is correct тАФ Sun tracking is mandatory for concentrating collectors (Cylindrical and parabolic) to keep the focused beam aligned with the receiver.
Always remember that stationary collectors (flat plate) are designed for thermal applications at low temperatures, whereas tracking collectors are for high-temperature thermodynamic cycles.