Join 60,000+ competitive exam aspirants
Tellurometer, a long-range EDM, uses ________ for distance measurement.
visible light waves
ultraviolet waves
microwaves
infrared waves
microwaves
The Tellurometer is a precision electronic distance measurement (EDM) instrument that operates using electromagnetic waves in the microwave frequency range (typically 3000 MHz). It measures the phase difference between transmitted and reflected microwave signals to calculate the distance between the master and remote stations.
The Tellurometer is a precision electronic distance measurement (EDM) instrument that operates using electromagnetic waves in the microwave frequency range (typically 3000 MHz). It measures the phase difference between transmitted and reflected microwave signals to calculate the distance between the master and remote stations.
D=4╧АfvтЛЕ╬Ф╧ХтАЛ тАФ Distance formula based on phase difference
v=ncтАЛ тАФ Velocity of wave where n is the refractive index
The Tellurometer employs a phase-comparison technique. A modulated carrier wave is transmitted from the master unit to the remote unit, where it is modulated and retransmitted back. By comparing the phase shift ╬Ф╧Х of the received wave relative to the transmitted wave, the distance D is derived using the relation D=4╧АfvтЛЕ╬Ф╧ХтАЛ, where v is the velocity of the signal in the atmosphere and f is the modulation frequency.
Tellurometer was the first successful microwave EDM instrument developed by Wadley in 1957.
It operates effectively under adverse weather conditions like fog or light rain.
It requires two operators, one at the master station and one at the remote station.
It is primarily used for long-range surveys (up to 50 km or more).
Capability to operate during daylight and in poor visibility conditions.
Suitable for long-range distance measurement.
Rugged design suitable for field survey operations.
Susceptible to ground-reflected multipath interference (swing effect).
Requires active participation of personnel at both ends.
Lower accuracy compared to light-wave EDMs over short distances.
Geodetic control surveys.
Large-scale triangulation.
Long-range baseline measurements.
The refractive index n of air for microwaves depends heavily on atmospheric pressure, temperature, and humidity, which must be corrected during measurement.
Visible light and infrared waves are used in Geodimeters, which provide higher precision for shorter distances.
Ultraviolet waves are not typically utilized for distance measurement in standard civil engineering surveying instruments.
C is correct тАФ The Tellurometer operates by transmitting microwaves to measure the time taken for a signal to traverse a distance, utilizing phase comparison to determine the final value.
Always remember that microwave EDMs are best for long-range, all-weather tasks, whereas light-wave (infrared/laser) EDMs are preferred for short-range high-precision work.