Join 60,000+ competitive exam aspirants
The analysis giving fixed carbon, volatile combustible matter, ash and moisture is called the
Ultimate analysis
Proximate analysis
Gross analysis
Orast analysis
Proximate analysis
Proximate analysis is a standard laboratory procedure used to determine the relative amounts of moisture, volatile matter, ash, and fixed carbon in a solid fuel, such as coal. It provides a quick and practical assessment of fuel quality, specifically useful for assessing its suitability for combustion and gasification processes.
Proximate analysis is a standard laboratory procedure used to determine the relative amounts of moisture, volatile matter, ash, and fixed carbon in a solid fuel, such as coal. It provides a quick and practical assessment of fuel quality, specifically useful for assessing its suitability for combustion and gasification processes.
Fixed┬аCarbon=100тИТ(%M+%VM+%Ash) тАФ Calculation of fixed carbon
The principle relies on controlled thermal decomposition. 1. Moisture is removed by heating the sample to 105тИТ110┬░C until constant mass. 2. Volatile matter is determined by heating the dried sample to 950┬░C in a closed crucible for 7 minutes to drive off combustible gases. 3. Ash is determined by burning the remaining sample in an open crucible to reach a constant mass. 4. Fixed carbon is calculated by subtracting the percentages of moisture, volatile matter, and ash from 100%.
Proximate analysis is time-efficient compared to ultimate analysis.
It directly dictates the calorific value and the behavior of coal in the furnace.
Fixed carbon acts as the main heat producer in the combustion process.
Provides quick evaluation of coal quality.
Low cost and simple experimental procedure.
Indicates the ignition and coking properties of fuel.
Does not provide elemental composition (C, H, O, N, S).
Results depend on the temperature and duration of heating.
Selection of coal for thermal power plants.
Determining the coal classification for industrial boilers.
| Feature | Proximate Analysis | Ultimate Analysis |
|---|---|---|
Focus | Fuel behavior | Elemental composition |
Ultimate analysis determines the elemental composition (C, H, O, N, S) of the fuel.
Orsat analysis is used for the analysis of flue gases, not solid fuels.
B is correct тАФ Proximate analysis specifically classifies the major components (moisture, volatile matter, ash, and fixed carbon) of solid fuels.
Always remember: Proximate = Physical/Practical properties; Ultimate = Universal/Elemental composition.