Join 60,000+ competitive exam aspirants
The ash content of bituminous coal is
to 3 %
to 12 %
15 to 20 %
None of above
to 12 %
Bituminous coal, which is commonly used in thermal power plants for electricity generation, typically contains an ash content ranging between 5% and 12%. Ash content represents the non-combustible mineral residue left after the coal is completely burned.
Bituminous coal, which is commonly used in thermal power plants for electricity generation, typically contains an ash content ranging between 5% and 12%. Ash content represents the non-combustible mineral residue left after the coal is completely burned.
Ash%=MassOriginal┬аCoalтАЛMassAshтАЛтАЛ├Ч100
During the combustion process in a boiler furnace, the organic carbon, hydrogen, and sulfur are oxidized to generate heat. The mineral matter, composed of inorganic compounds like silica, alumina, and iron oxides, does not burn and remains as ash, which must be collected and disposed of from the furnace bottom or via electrostatic precipitators (ESP).
Ash reduces the net calorific value of coal.
Higher ash content leads to increased wear and tear on boiler tubes and ash handling equipment.
The presence of ash necessitates advanced flue gas cleaning systems like ESPs.
Bituminous coal is ranked between sub-bituminous and anthracite based on carbon content and heating value.
High energy density compared to lignite
Better ignition and flame stability in boilers
High ash content increases particulate emissions
Requires high auxiliary power for ash handling systems
Steam generation in thermal power plants
Coking coal for metallurgical processes
Indian bituminous coal often has higher ash content, sometimes exceeding 30-40%, which requires specialized boiler designs.
Option A is incorrect as 3% is too low for standard bituminous coal; Option C represents high-ash Indian grade coals rather than typical world-class bituminous standards.
B is correct тАФ Typical bituminous coal contains an ash content in the range of 5% to 12%.
Always remember that in Indian Power Systems, coal quality is a major factor; higher ash content directly leads to higher Specific Coal Consumption (SCC) in kg/kWh.