Join 60,000+ competitive exam aspirants
The B/H characteristics can be determined using _______
Ammeter
Fluxmeter
Voltmeter
Multimeter
Fluxmeter
The B/H characteristics (magnetic hysteresis loop) represent the relationship between magnetic flux density (B) and magnetic field intensity (H). A fluxmeter is the standard instrument used to determine these characteristics because it measures the change in magnetic flux linkage by integrating the induced EMF over time.
The B/H characteristics (magnetic hysteresis loop) represent the relationship between magnetic flux density (B) and magnetic field intensity (H). A fluxmeter is the standard instrument used to determine these characteristics because it measures the change in magnetic flux linkage by integrating the induced EMF over time.
B=A╬жтАЛ тАФ Magnetic flux density (Wb/m2)
H=lNIтАЛ тАФ Magnetic field intensity (A/m)
╬ж=тИлNeтАЛdt тАФ Working principle of fluxmeter
When a search coil wound around the specimen is subjected to a changing magnetic field, an EMF e=тИТNdtd╬жтАЛ is induced. The fluxmeter acts as an integrating device (flux-integrator) such that its deflection ╬╕ is directly proportional to the total change in flux ╬Ф╬ж, given by ╬Ф╬ж=тИлNeтАЛdt. By varying the magnetizing current I and measuring the corresponding flux ╬ж using the fluxmeter, the B-H curve is plotted.
The fluxmeter is essentially a ballistic galvanometer with negligible restoring torque.
B-H characteristics represent the hysteresis properties of ferromagnetic materials.
The area enclosed by the B-H loop represents energy loss per cycle (hysteresis loss).
Measurement requires a controlled magnetizing circuit and a ballistic search coil.
Direct integration of induced voltage.
High sensitivity for magnetic flux measurements.
Does not require constant current flow during the reading.
Requires careful calibration.
Sensitive to external magnetic interference.
Restricted to low-frequency magnetic measurements.
Testing magnetic properties of transformer core materials.
Quality control in manufacturing of soft and hard magnetic alloys.
Research in electromagnetics and material science.
Option A (Ammeter) measures current, not flux. Option C (Voltmeter) measures potential difference, not flux. Option D (Multimeter) is a general-purpose tool and lacks the specialized integration capability required for accurate B-H curve tracing.
A ballistic galvanometer is often used as a simpler alternative to a fluxmeter for steady-state flux change measurements.
B is correct тАФ A fluxmeter is utilized to measure the magnetic flux change within a specimen, enabling the plotting of B/H characteristics.
Always remember that for any instrument requiring flux integration, a device with negligible restoring force (like a fluxmeter) is required, whereas voltmeters/ammeters measure instantaneous values.