Join 60,000+ competitive exam aspirants
The boilers using lignite as fuel do not use
Spreader stoker
Traveling grate stoker
Underfeed stoker
All of above
Underfeed stoker
Underfeed stokers are unsuitable for lignite because lignite has a high moisture content and high volatile matter, which causes it to cake or plug the fuel bed. Underfeed stokers rely on a continuous feed mechanism where fuel is pushed from beneath, a process that restricts air flow and causes uneven burning for low-grade, high-moisture fuels like lignite.
Underfeed stokers are unsuitable for lignite because lignite has a high moisture content and high volatile matter, which causes it to cake or plug the fuel bed. Underfeed stokers rely on a continuous feed mechanism where fuel is pushed from beneath, a process that restricts air flow and causes uneven burning for low-grade, high-moisture fuels like lignite.
QnetтАЛ=QgrossтАЛтИТ1009H+WтАЛ├ЧL
n=mfтАЛ├ЧC.V.msтАЛ(hsтАЛтИТhwтАЛ)тАЛ
In an underfeed stoker, coal is introduced from below the fuel bed using a screw or ram. As the fuel rises, it is dried and devolatilized; however, because lignite is highly reactive and prone to significant volume change upon heating, the restricted movement in the retort leads to 'coking' or bed consolidation. This prevents effective primary air penetration, which is essential for the efficient combustion of high-moisture lignite.
Lignite is a low-rank coal with high moisture (up to 45%) and high volatile content.
Underfeed stokers require coal that has good caking properties or specific size consistencies not met by run-of-mine lignite.
Spreader stokers and traveling grates are preferred for lignite as they allow for better drying and surface combustion.
The combustion of lignite requires large furnace volumes due to its lower calorific value.
Spreader stokers provide quick response to load fluctuations.
Traveling grates allow continuous ash removal without disturbing the fire.
Lignite has a tendency to spontaneous combustion during storage.
High ash content in lignite leads to severe slagging in boilers.
Thermal power plants using captive lignite mines.
Industrial boilers in regions with abundant lignite resources (e.g., Neyveli, India).
Lignite is characterized by its woody or earthy structure, making it highly porous.
Option A (Spreader Stoker) is highly recommended for lignite as it burns a portion of the fuel in suspension.
Option B (Traveling Grate) is suitable if the lignite is properly sized to ensure uniform air distribution.
C is correct тАФ Underfeed stokers are technically incompatible with lignite due to the fuel's high moisture and volatile nature, which impedes the mechanical feed and air distribution required for this stoker type.
Always remember that in Indian competitive exams, lignite (Brown Coal) is treated as a low-grade, high-moisture fuel requiring suspension-burning or grate-burning methods that favor drying, while caking-coal-specific methods like underfeed are avoided.