Join 60,000+ competitive exam aspirants
The component inductance due to the internal flux-linkage of a non-magnetic straight solid circular conductor per meter length, has a constant value, and is independent of the conductor-diameter, because
All the internal flux due to a current remains concentrated on the peripheral region of the conductor
The internal magnetic flux-density along the radial distance from the centre of the conductor increases proportionately to the current enclosed
The entire current is assumed to flow along the conductor axis and the internal flux is distributed uniformly and concentrically
The current in the conductor is assumed to be uniformly distributed throughout the conductor cross-section
The internal magnetic flux-density along the radial distance from the centre of the conductor increases proportionately to the current enclosed
The internal inductance of a conductor represents the magnetic energy stored within the conductor's volume due to current flow. For a non-magnetic circular conductor with uniform current distribution, this value is constant because the magnetic field intensity inside the conductor increases linearly with the radial distance, and the flux linkage per unit length becomes independent of the total radius.
The internal inductance of a conductor represents the magnetic energy stored within the conductor's volume due to current flow. For a non-magnetic circular conductor with uniform current distribution, this value is constant because the magnetic field intensity inside the conductor increases linearly with the radial distance, and the flux linkage per unit length becomes independent of the total radius.
LintтАЛ=8╧А╬╝0тАЛтАЛ тАФ internal inductance per unit length of a solid circular conductor
HrтАЛ=2╧АR2IrтАЛ тАФ magnetic field intensity at radius r inside the conductor
Using Ampere's circuital law, the magnetic field strength at radius r inside a conductor of radius R is HrтАЛ=2╧АrIrтАЛтАЛ. With uniform current density, the current enclosed at radius r is IrтАЛ=IтЛЕ╧АR2╧Аr2тАЛ=IтЛЕR2r2тАЛ. Thus, HrтАЛ=2╧АR2IrтАЛ. The internal flux linkage ╬╗intтАЛ is derived by integrating the flux density over the cross-section, leading to an internal inductance of LintтАЛ=8╧А╬╝0тАЛтАЛ Henries per meter, which is a constant independent of the conductor radius R.
Internal inductance is independent of the conductor radius R for a solid cylindrical conductor.
The uniform current density assumption is critical for the constant value of LintтАЛ=8╧А╬╝0тАЛтАЛ.
For non-magnetic materials, relative permeability ╬╝rтАЛ=1, making ╬╝=╬╝0тАЛ.
Internal flux linkage decreases as r increases due to the reduction of enclosed current area, exactly canceling the effect of increasing flux path length.
Simplifies calculation of transmission line impedance
Provides a predictable parameter for low-frequency power system analysis
Does not account for skin effect at high frequencies
Assumes constant material properties (non-magnetic)
Calculation of GMR (Geometric Mean Radius)
Transmission line series impedance determination
Standard value of internal inductance is 0.5├Ч10тИТ7H/m or 0.05╬╝H/m.
Option D is also a contributing factor, but B explains the physical proportionality that leads to the specific constant result.
B is correct тАФ The internal magnetic flux-density distribution and the enclosed current distribution together result in an internal inductance that is mathematically independent of the conductor radius.
Remember that while internal inductance is constant (0.05╬╝H/m), external inductance depends logarithmically on the spacing between conductors (GMD/GMR).