Join 60,000+ competitive exam aspirants
The cut-in velocity in wind power machine is
Maximum wind speed at which a wind turbine is designed to operate
Minimum wind speed at which a wind turbine is designed to operate
Wind speed at which the wind turbine stops functioning
Velocity of the rotor
Minimum wind speed at which a wind turbine is designed to operate
The cut-in velocity is the minimum wind speed required for a wind turbine rotor to start rotating and generate useful electrical power. Below this speed, the aerodynamic torque produced by the blades is insufficient to overcome the mechanical friction and cogging torque of the generator system.
The cut-in velocity is the minimum wind speed required for a wind turbine rotor to start rotating and generate useful electrical power. Below this speed, the aerodynamic torque produced by the blades is insufficient to overcome the mechanical friction and cogging torque of the generator system.
P=21тАЛ╧БAv3CpтАЛ тАФ where v represents the wind velocity influencing the power output
vcutтИТinтАЛ<v<vcutтИТoutтАЛ тАФ represents the operational wind speed range
As wind speed increases, the lift force on the turbine blades increases. At the cut-in speed, the aerodynamic power captured becomes greater than the internal losses (mechanical/electrical). The control system then engages the turbine, allowing it to transition from a standstill to an operational state, often connected to the grid.
Cut-in speed is the threshold for power generation start-up.
Cut-out speed is the maximum safety limit before the turbine shuts down to prevent structural damage.
Rated speed is the wind speed where the turbine produces its maximum designed power (rated capacity).
Protects turbine from operating at low efficiency in low winds
Prevents mechanical wear during non-productive wind conditions
Limits site selection to regions with consistent wind speeds above the cut-in threshold
Requires complex control systems to manage start/stop transitions
Wind Energy Conversion Systems (WECS)
Grid-connected wind farms
Off-grid wind turbine installations
Typical cut-in speeds for modern utility-scale wind turbines range between 3 m/s and 4 m/s.
Option A refers to the Rated Wind Speed (or sometimes confused with Cut-out), Option C refers to the Cut-out velocity, and Option D is simply the rotation speed of the shaft/rotor.
B is correct тАФ The cut-in velocity is the threshold minimum wind speed required for the turbine to generate power.
Always distinguish between 'Cut-in' (starts power), 'Rated' (max power), and 'Cut-out' (stops power) as they are frequently tested in power system generation modules.