Join 60,000+ competitive exam aspirants
The energy storing capacity of the magnetic field is about ________ times greater than that of the electric field.
50,000
25,000
10,000
40,000
25,000
In electromechanical energy conversion devices like motors and transformers, magnetic fields are preferred over electric fields because magnetic materials can store significantly higher energy per unit volume. For practical engineering materials working within conventional flux density limits, the magnetic energy storage capacity is approximately 25,000 times greater than that of an electric field operating near air breakdown strength.
In electromechanical energy conversion devices like motors and transformers, magnetic fields are preferred over electric fields because magnetic materials can store significantly higher energy per unit volume. For practical engineering materials working within conventional flux density limits, the magnetic energy storage capacity is approximately 25,000 times greater than that of an electric field operating near air breakdown strength.
WmтАЛ=2╬╝0тАЛB2тАЛ тАФ Magnetic energy density per unit volume (J/m┬│)
WeтАЛ=21тАЛ╧╡0тАЛE2 тАФ Electric energy density per unit volume (J/m┬│)
Ratio=WeтАЛWmтАЛтАЛ=21тАЛ╧╡0тАЛE2B2/(2╬╝0тАЛ)тАЛтЙИ25,000 тАФ Ratio of magnetic to electric energy density
The maximum energy stored per unit volume in a magnetic field is WmтАЛ=21тАЛ╬╝0тАЛB2тАЛ, where magnetic flux density B in iron/air-gap can safely reach around 1.6┬аT. In an electric field, maximum energy storage WeтАЛ=21тАЛ╧╡0тАЛE2 is strictly limited by the dielectric breakdown strength of air (EтЙИ3├Ч106┬аV/m). Comparing these energy densities gives a ratio WmтАЛ/WeтАЛтЙИ25,000.
Practical magnetic flux density in electric machines typically reaches 1.6┬аT to 1.8┬аT.
Dielectric strength of air limits the maximum electric field intensity to about 3├Ч106┬аV/m (3┬аkV/mm).
Because magnetic energy storage density is vastly superior, practical electric rotating machines and transformers operate exclusively on magnetic field coupling rather than electrostatic coupling.
High energy density allows compact size and lightweight design for electric motors and generators.
Magnetic materials (like silicon steel) can easily guide and concentrate magnetic flux without dielectric breakdown issues.
Magnetic energy conversion produces core losses (hysteresis and eddy current losses).
High flux densities cause magnetic saturation in ferromagnetic cores.
Electromechanical energy conversion in electric motors and generators.
Power transformers and inductors for energy transfer and storage.
Option A (50,000), Option C (10,000), and Option D (40,000) are incorrect values that do not correspond to the physical constants ╬╝0тАЛ=4╧А├Ч10тИТ7┬аH/m and ╧╡0тАЛ=8.854├Ч10тИТ12┬аF/m under realistic operational limits (BтЙИ1.6┬аT,EтЙИ3┬аMV/m).
The exact numerical calculation yields: WmтАЛ=2├Ч4╧А├Ч10тИТ71.62тАЛтЙИ1.018.591┬аJ/m3, WeтАЛ=21тАЛ├Ч8.854├Ч10тИТ12├Ч(3├Ч106)2тЙИ39.84┬аJ/m3. Ratio = 39.841,018,591тАЛтЙИ25,567тЙИ25,000.
B is correct тАФ Practical magnetic field energy density is about 25,000 times higher than electric field energy density limited by air breakdown.
In competitive exams like GATE and ESE, remember this standard 25,000 ratio as the primary technical reason why rotating electrical machines are magnetic rather than electrostatic.