Join 60,000+ competitive exam aspirants
The gas turbine power plants have the advantages of
Simplicity of design and installation, high reliability, compactness, clean exhaust and low initial cost
Quick starting and capability of putting to share full load in few minutes
High overall efficiency, low specific consumption and long life in comparison to that of steam power plants
Both (a) and (b)
Both (a) and (b)
Gas turbine power plants utilize the Brayton cycle, which allows for a high power-to-weight ratio and rapid startup capabilities. Their design is inherently simpler than steam plants because they eliminate the need for large boilers, condensers, and complex water treatment systems.
Gas turbine power plants utilize the Brayton cycle, which allows for a high power-to-weight ratio and rapid startup capabilities. Their design is inherently simpler than steam plants because they eliminate the need for large boilers, condensers, and complex water treatment systems.
╬╖thтАЛ=1тИТ(rpтАЛ)╬│╬│тИТ1тАЛ1тАЛ тАФ Thermal efficiency of the ideal Brayton cycle where rpтАЛ is pressure ratio.
WnetтАЛ=WturbineтАЛтИТWcompressorтАЛ тАФ Net work output of the cycle.
Air is compressed in a compressor, mixed with fuel in a combustion chamber, and ignited at constant pressure. The resulting high-temperature, high-pressure gases expand through the turbine to produce mechanical work. Because there is no phase change involved in the process, the plant is compact and can be started from a cold state to full load in a matter of minutes, making it ideal for peak load operation.
Gas turbines are primarily used for peaking plants due to fast response times.
The plant does not require a large cooling water supply, unlike conventional thermal plants.
High exhaust temperatures can be utilized for Cogeneration (Combined Heat and Power).
Low initial installation cost
Quick startup time
Compact physical footprint
Clean and modular design
Lower overall efficiency compared to large-scale steam power plants
High sensitivity to ambient air temperature
Expensive fuel requirements (high-grade oil or natural gas)
Peak load power generation
Aviation propulsion
Industrial combined cycle power plants
Option C is incorrect because gas turbine plants generally have lower overall thermal efficiency compared to modern steam power plants, unless configured as a Combined Cycle Gas Turbine (CCGT) system.
The Brayton cycle efficiency depends primarily on the compressor pressure ratio and the turbine inlet temperature.
D is correct тАФ Gas turbine plants are preferred for their rapid load response and modular, compact design, which offers economic advantages for specific operational needs.
Always remember that in power system planning, gas turbines are categorized as 'Peaking Plants', whereas steam/hydro are often 'Base Load Plants'.