Join 60,000+ competitive exam aspirants
The heating value of gaseous fuels is about
300 kJ/litre
100 kJ/litre
30 kJ/litre
10 kJ/litre
30 kJ/litre
The heating value (or calorific value) of typical gaseous fuels used in power generation, such as coal gas or producer gas, generally ranges between 15 to 40 kJ/litre. This value represents the energy released during the complete combustion of a unit volume of the fuel under standard temperature and pressure conditions.
The heating value (or calorific value) of typical gaseous fuels used in power generation, such as coal gas or producer gas, generally ranges between 15 to 40 kJ/litre. This value represents the energy released during the complete combustion of a unit volume of the fuel under standard temperature and pressure conditions.
Q=VHтАЛ тАФ where Q is heating value in kJ/litre, H is total heat in kJ, and V is volume in litres
The energy density of a gas is determined by its molecular composition, primarily the concentration of combustible components like CH4тАЛ, H2тАЛ, and CO. When these gases react with oxygen in a combustion chamber, the chemical energy stored in their molecular bonds is released as heat, which is then measured in kJ per unit volume (litre or m3).
The heating value for gaseous fuels is significantly lower than that of liquid or solid fuels on a per-unit-mass basis, but it is measured per unit volume for gases.
Common gaseous fuels like natural gas have a higher calorific value (approx 35-40 kJ/litre) compared to producer gas (approx 5-6 kJ/litre).
Measurement typically assumes standard temperature (273 K) and pressure (1 atm) conditions.
Easy to transport via pipelines
Clean combustion with minimal ash production
Requires large storage volumes for equivalent energy compared to liquids
Risk of leaks and explosive mixtures
Thermal power plants using combined cycle gas turbines
Industrial furnace heating
Natural gas primarily consists of methane (CH4тАЛ), giving it a high energy density among gaseous fuels.
Option D (10 kJ/litre) is closer to producer gas, but the generalized average for common industrial gaseous fuels is closer to 30 kJ/litre.
C is correct тАФ The typical heating value for common industrial gaseous fuels falls within the range of 30 kJ/litre.
In power systems, always differentiate between Gross Calorific Value (GCV) and Net Calorific Value (NCV) based on whether the latent heat of water vapor is included.