Join 60,000+ competitive exam aspirants
The horizontal spacing between phase conductors of 132 kV transmission line is
8 m
6 m
4 m
2 m
6 m
In a 132 kV transmission line, the horizontal spacing between phase conductors is empirically maintained at approximately 6 meters. This distance is determined by the need to prevent flashovers between conductors during atmospheric disturbances, switching surges, and the physical requirements of stringing the conductors under tension.
In a 132 kV transmission line, the horizontal spacing between phase conductors is empirically maintained at approximately 6 meters. This distance is determined by the need to prevent flashovers between conductors during atmospheric disturbances, switching surges, and the physical requirements of stringing the conductors under tension.
VlineтАЛ=132┬аkV тАФ Nominal voltage of the transmission system
DтИЭVтАЛ тАФ The approximate empirical relation between spacing D and voltage level V for overhead lines
The minimum spacing between conductors is primarily governed by the line voltage to avoid air breakdown (dielectric strength of air is ~30 kV/cm peak). The formula for spacing D is often derived from DтЙИ150VтАЛ+0.5 (where D is in meters and V in kV), though standard design practices in India for 132 kV lines typically standardize the phase-to-phase horizontal separation to 6 meters to ensure safety clearance and mechanical stability.
Spacing is primarily determined by the operating voltage level to prevent arcing.
Higher voltages require larger conductor spacing due to increased potential gradient.
For 132 kV, 6 meters is a widely accepted design value in Indian standard transmission practices.
Mechanical factors like sagging and galloping also influence the minimum distance choice.
Reduces probability of phase-to-phase short circuits
Accounts for conductor vibration and galloping effects
Increases the size of the cross-arm and tower dimensions
Increases the inductive reactance of the line due to larger loop area
High Voltage Transmission Networks
Inter-grid power connectivity
The spacing is heavily dependent on the span length; longer spans require greater horizontal distance to avoid mid-span clashing.
Option 6m is the standard design choice for 132kV whereas 4m is often considered insufficient for modern insulation requirements at this voltage level.
B is correct тАФ The standard horizontal spacing between phase conductors for a 132 kV transmission line is 6 meters.
Remember that while voltage determines minimum clearance, line reactance XLтАЛ also increases as spacing increases (XLтАЛтИЭln(rDтАЛ)), so transmission engineers must balance clearance safety against electrical efficiency.