Join 60,000+ competitive exam aspirants
The insulating material commonly used in cables is
PVC
Empire tape
Paper
Any of above
Paper
Paper, specifically impregnated paper, has historically been the primary insulating material for high-voltage underground power cables due to its excellent dielectric properties and thermal stability. While modern cables increasingly use XLPE (Cross-Linked Polyethylene), paper insulation remains a standard, foundational subject in electrical power systems.
Paper, specifically impregnated paper, has historically been the primary insulating material for high-voltage underground power cables due to its excellent dielectric properties and thermal stability. While modern cables increasingly use XLPE (Cross-Linked Polyethylene), paper insulation remains a standard, foundational subject in electrical power systems.
gmaxтАЛ=rln(R/r)VтАЛ тАФ Maximum dielectric stress in a single-core cable
C=ln(R/r)2╧А╧╡0тАЛ╧╡rтАЛтАЛ тАФ Capacitance per unit length of the cable
The insulating paper is typically wrapped in multiple layers around the conductor and then impregnated with a mineral oil or insulating compound. This impregnation process eliminates air pockets (voids) within the cellulose fibers, preventing partial discharge and increasing the dielectric strength. The cable is then sheathed (usually with lead) to keep moisture out and prevent the oil from leaking.
Impregnated paper is chosen for its low dielectric loss (tan╬┤).
It requires a metallic sheath (lead or aluminum) to prevent ingress of moisture.
The maximum stress in a cable occurs at the surface of the conductor (inner radius r).
Paper insulation is categorized into solid type, screened type, and pressure type cables.
High dielectric strength when properly impregnated
Excellent thermal stability
Low cost and long service life
Hygroscopic nature (absorbs moisture easily)
Requires complex lead sheathing
Heavier and less flexible than modern extruded polymers like PVC or XLPE
High voltage underground transmission lines
Oil-filled submarine cables
Substation distribution networks
PVC (Polyvinyl Chloride) is widely used for low and medium voltage cables due to its flexibility and ease of manufacturing.
Empire tape (varnished cambric) is often used for jointing and termination of cables rather than the main cable insulation.
The question assumes the traditional context of underground cable insulation materials.
C is correct тАФ Paper is the historically significant and standard insulating material for high-voltage underground cables when impregnated with insulating oil.
Remember that while PVC is common for low-voltage residential wiring, Paper and XLPE dominate high-voltage underground power transmission systems.