Join 60,000+ competitive exam aspirants
The kVA rating of an ordinary 2-winding transformer is increased when connected as an autotransformer because
transformation ratio is increased
secondary voltage is increased
energy is transferred both inductively and conductivity
secondary current is increased
energy is transferred both inductively and conductivity
In an autotransformer, the kVA rating increases because energy is transferred both inductively and conductively. This allows for a greater transfer of power compared to a traditional two-winding transformer.
In an autotransformer, the kVA rating increases because energy is transferred both inductively and conductively. This allows for a greater transfer of power compared to a traditional two-winding transformer.
kVA=1000VтЛЕIтАЛ тАФ where V is voltage and I is current
The mechanism behind this is that an autotransformer utilizes a portion of the winding for both primary and secondary circuits, which enables direct electrical connection in addition to magnetic coupling. This dual path for energy transfer enhances the overall capacity of the transformer.
An autotransformer combines both winding and direct electrical paths, improving efficiency.
The ability to transfer energy through both inductive and conductive means increases power handling capacity.
Higher efficiency compared to two-winding transformers.
Reduced size and cost for the same power rating.
Less isolation between primary and secondary circuits.
Potential for higher fault currents due to direct electrical connection.
Voltage regulation in power distribution systems.
Starting of large induction motors.
Standard value or specification: Autotransformers are typically rated higher than conventional transformers.
Option A is incorrect as transformation ratio does not increase; it's a characteristic of autotransformers.
C is correct тАФ Energy transfer occurs both through magnetic induction and direct electrical conduction.
Understanding the different types of transformers and their connections is crucial for electrical machine analysis.