Join 60,000+ competitive exam aspirants
The material commonly used for sheaths of underground cables is
Lead
Rubber
Copper
Iron
Lead
Lead is the material commonly used for the sheath of underground cables because of its excellent imperviousness to moisture and its high resistance to chemical corrosion in soil. The sheath acts as a protective layer, preventing the ingress of water into the cable insulation which would otherwise cause electrical failure.
Lead is the material commonly used for the sheath of underground cables because of its excellent imperviousness to moisture and its high resistance to chemical corrosion in soil. The sheath acts as a protective layer, preventing the ingress of water into the cable insulation which would otherwise cause electrical failure.
RisoтАЛ=2╧АL╧БтАЛln(dDтАЛ) тАФ insulation resistance of a cable which the sheath protects
The cable sheath serves two primary functions: it acts as a moisture-proof barrier for the insulation (like oil-impregnated paper) and provides mechanical protection against ingress of corrosive elements from the surrounding soil. Lead is preferred due to its low melting point, allowing it to be extruded onto the cable seamlessly, and its ability to maintain structural integrity under standard burial conditions.
Lead is completely impervious to moisture and gas.
It is malleable, allowing for flexibility during cable laying.
It is resistant to the corrosive environment typically found in underground soil.
Modern cables may use synthetic materials like PVC or PE, but lead remains the standard for high-voltage paper-insulated cables.
Excellent moisture barrier
Chemically inert in most soil conditions
Easy to manufacture via extrusion
Heavy weight increases cable transport cost
Susceptible to vibration-induced fatigue cracking
High cost compared to modern polymers
High-Voltage (HV) underground transmission lines
Paper Insulated Lead Covered (PILC) cables
Submarine power cables
Option B (Rubber) is used as insulation, not as a moisture-proof sheath.
Option C (Copper) is used as the conducting core.
Option D (Iron) is used primarily for the mechanical armor layer, not the sheath, due to corrosion risks.
A is correct тАФ Lead is the standard material for underground cable sheathing due to its complete moisture resistance and durability.
Always remember that the sheath is primarily for moisture protection, whereas the 'armoring' layer (usually galvanized steel wire or tape) is for mechanical protection.