Join 60,000+ competitive exam aspirants
The maximum energy conversion efficiency of a wind turbine for a given swept area is
25.10%
50.40%
59.30%
99.90%
59.30%
The maximum theoretical efficiency of a wind turbine, known as the Betz limit or Betz's law, is 59.3%. This limit states that no turbine can capture more than 16/27 of the kinetic energy in the wind, regardless of the rotor design.
The maximum theoretical efficiency of a wind turbine, known as the Betz limit or Betz's law, is 59.3%. This limit states that no turbine can capture more than 16/27 of the kinetic energy in the wind, regardless of the rotor design.
PavailableтАЛ=21тАЛ╧БAv3 тАФ Total power available in wind
PturbineтАЛ=CpтАЛ├Ч21тАЛ╧БAv3 тАФ Power extracted by turbine
Cp,maxтАЛ=2716тАЛтЙИ0.593 тАФ Betz Limit
The wind turbine extracts kinetic energy from air mass. If the turbine extracted 100% of the energy, the air would stop moving completely behind the blades, creating a block that prevents further wind flow. To allow continuous flow, the wind must retain some velocity, which mathematically limits the maximum extractable power coefficient CpтАЛ to 2716тАЛ.
Derived by German physicist Albert Betz in 1919.
The limit is independent of the turbine blade design.
Real-world turbines typically achieve CpтАЛ values between 0.35 and 0.45 due to mechanical and aerodynamic losses.
Provides a fundamental benchmark for turbine performance.
Guides engineering design toward optimizing aerodynamic profiles.
Does not account for losses like blade drag or friction.
Cannot be exceeded by any physical turbine configuration.
Wind energy system design
Performance evaluation of horizontal axis wind turbines (HAWT)
The efficiency of 59.3% is the theoretical maximum; actual efficiency is always lower.
Options A, B, and D are incorrect as they do not correspond to the physical derivation of the Betz limit.
C is correct тАФ The maximum energy conversion efficiency of a wind turbine is limited by the Betz limit to 59.3%.
Always remember the fraction 16/27, as it frequently appears in GATE and IES exams when calculating power coefficient limits.