Join 60,000+ competitive exam aspirants
The no load current in a power transformer in term of its rated current, is
to 6%
10 to 20%
15 to 30%
30 to 50%
to 6%
The no-load current (I0тАЛ) of a power transformer is the current drawn by the primary winding when the secondary is open-circuited. It is typically very small, ranging between 2% to 6% of the full-load rated current, primarily serving to establish the mutual magnetic flux and account for core losses (hysteresis and eddy current losses).
The no-load current (I0тАЛ) of a power transformer is the current drawn by the primary winding when the secondary is open-circuited. It is typically very small, ranging between 2% to 6% of the full-load rated current, primarily serving to establish the mutual magnetic flux and account for core losses (hysteresis and eddy current losses).
I0тАЛ=Im2тАЛ+Iw2тАЛтАЛ тАФ Vector sum of magnetizing and core-loss components
IwтАЛ=I0тАЛcos╧Х0тАЛ тАФ Core loss component of no-load current
ImтАЛ=I0тАЛsin╧Х0тАЛ тАФ Magnetizing component of no-load current
The no-load current consists of two components: the magnetizing component (ImтАЛ), which is in quadrature with the applied voltage to produce the core flux, and the core-loss component (IwтАЛ), which is in phase with the voltage to supply power for hysteresis and eddy current losses. Because the permeability of the transformer core is kept high to maintain low reluctance, ImтАЛ remains minimal, resulting in a low total I0тАЛ.
The power factor at no-load is very low (typically 0.1 to 0.2 lagging) due to the highly inductive nature of the magnetizing circuit.
The no-load current is responsible for core saturation and represents the 'excitation' requirement of the transformer.
Higher no-load current indicates higher core losses or lower magnetic permeability of the core material.
Minimizes copper losses at no-load condition.
Helps in maintaining high efficiency during light load periods.
Draws reactive power even when the transformer is not delivering useful power to a load.
Increases the total reactive demand of the power system grid.
Used in calculating the shunt branch parameters of the equivalent circuit model of a transformer.
Essential for energy auditing and assessing transformer health through open-circuit tests.
Standard values in power transformers range from 2% to 6%. Distribution transformers may exhibit slightly higher values due to specific design optimizations.
Option B (10 to 20%), C (15 to 30%), and D (30 to 50%) are excessively high and would result in massive core heating and inefficient operation.
A is correct тАФ The no-load current is typically 2% to 6% of the full-load rated current to ensure the transformer operates efficiently without excessive core losses.
Always remember that the no-load current is mainly reactive (inductive); in the phasor diagram, it lags the applied voltage by nearly 90 degrees.