Join 60,000+ competitive exam aspirants
The number of discs in a string of insulators for 400 kV AC overhead line lies in the range of
32 to 33
22 to 23
15 to 16
9 to 10
22 to 23
For high-voltage transmission lines, the number of porcelain or glass insulator discs in a string is determined by the system voltage level and the required safety factor for flashover. For a 400 kV system, a string typically requires 22 to 23 discs to ensure the string withstands the high electric stress and transient overvoltages.
For high-voltage transmission lines, the number of porcelain or glass insulator discs in a string is determined by the system voltage level and the required safety factor for flashover. For a 400 kV system, a string typically requires 22 to 23 discs to ensure the string withstands the high electric stress and transient overvoltages.
NтЙИ3тАЛ├ЧVdiscтАЛVlineтАЛтАЛ тАФ Estimating the number of discs required based on line-to-neutral voltage and per-disc capacity
╬╖=n├ЧVmaxтАЛVtotalтАЛтАЛ тАФ Efficiency of the insulator string where n is the number of discs
The voltage across each disc in a string is not equal due to shunt capacitance between the disc and the metal tower, which leads to uneven potential distribution. A longer string (more discs) is necessary at 400 kV to ensure that the voltage across the disc closest to the conductor does not exceed the dielectric strength of the insulator material, preventing puncture or flashover.
String efficiency is always less than 100% due to unequal voltage distribution.
The disc nearest to the conductor experiences the maximum electrical stress.
Grading rings or arcing horns are often used at 400 kV and above to improve voltage distribution.
Operating environment (pollution, altitude) also influences the final count of discs.
Ensures dielectric integrity of the transmission line
Prevents flashover under normal operating conditions
Higher costs due to the need for multiple units per string
Increased weight and mechanical load on the tower structure
400 kV EHV Transmission Networks
HVDC converter station busbars
For 220 kV systems, the standard number of discs typically ranges from 13 to 15.
For 765 kV systems, the number of discs increases significantly, often requiring 30+ discs in a single string.
B is correct тАФ A 400 kV AC overhead transmission line requires 22 to 23 insulator discs to manage the phase-to-ground voltage stress and prevent flashover.
Always remember that for transmission lines, adding more discs increases the physical length of the string, which increases tower height; engineers must balance insulator quantity against structural costs.