Join 60,000+ competitive exam aspirants
The operation of a nuclear reactor is controlled by controlling the multiplication factor (k), defined as, K = Number of neutrons of any one generation/Number of neutron of immediately preceding generation. The power level of the reactor can be increased by
Raising the value of k above 1 and keeping it at that raised value
Raising the value of k above 1, but later bringing it back to k=1
Lowering the value of k below 1 and keeping at that lowered value
Lowering the value of k below 1, but later bringing it back to k=1
Raising the value of k above 1, but later bringing it back to k=1
The multiplication factor k determines the neutron population balance in a nuclear reactor. To increase power, k must be greater than 1 (supercritical state) to increase neutron density, after which it must be returned to 1 (critical state) to maintain the new, higher power level.
The multiplication factor k determines the neutron population balance in a nuclear reactor. To increase power, k must be greater than 1 (supercritical state) to increase neutron density, after which it must be returned to 1 (critical state) to maintain the new, higher power level.
k=niтИТ1тАЛniтАЛтАЛ тАФ definition of effective multiplication factor
P(t)=P0тАЛe╧Д(kтИТ1)tтАЛ тАФ power growth rate as a function of k
The reactor power is directly proportional to the neutron population. When k>1, the reactor is supercritical, leading to an exponential growth in neutron flux. Once the desired power level is reached, the control rods are adjusted to bring k=1, restoring steady-state operation at the new power level.
k=1: Critical state (Steady power)
k>1: Supercritical state (Increasing power)
k<1: Subcritical state (Decreasing power)
Control rods adjust k by absorbing excess thermal neutrons.
Precise control over fission rate
Ability to stabilize reactor at desired load
Rapidly increasing k poses safety risks (runaway reaction)
Requires complex feedback control systems
Nuclear power plant startup and load following
Research reactor flux adjustment
The parameter k is also known as the effective multiplication factor (keffтАЛ).
Option A is incorrect because keeping k>1 would cause the power to rise indefinitely, leading to a meltdown.
Option C and D would lead to a shutdown of the reactor, not an increase in power.
B is correct тАФ increasing the power requires a temporary supercritical state (k>1) followed by a return to criticality (k=1) to sustain the elevated power level.
In reactor kinetics, always associate k>1 with transient growth and k=1 with steady-state, similar to how frequency stability works in load-frequency control for grid systems.