Join 60,000+ competitive exam aspirants
The proper indication of incomplete combustion is
The smoking exhaust from chimney
High temperature of flue gas
High CO content in flue gases at exit
High CO2тАЛ content in flue gases at exit
High CO content in flue gases at exit
Incomplete combustion occurs when there is insufficient oxygen to fully oxidize the fuel, leading to the formation of carbon monoxide (CO) instead of carbon dioxide (CO2). The presence of high levels of CO in the flue gases is the most accurate indicator of inefficient or incomplete combustion.
Incomplete combustion occurs when there is insufficient oxygen to fully oxidize the fuel, leading to the formation of carbon monoxide (CO) instead of carbon dioxide (CO2). The presence of high levels of CO in the flue gases is the most accurate indicator of inefficient or incomplete combustion.
C+O2тАЛтЖТCO2тАЛ+Heat (Complete Combustion)
2C+O2тАЛтЖТ2CO+Partial┬аHeat (Incomplete Combustion)
During complete combustion, carbon reacts with oxygen to form CO2тАЛ (C+O2тАЛтЖТCO2тАЛ). When air supply is restricted or mixing is poor, the reaction stops at CO (2C+O2тАЛтЖТ2CO). High CO concentrations signify energy loss, as the chemical potential energy of the fuel is not fully released.
High CO indicates fuel is being wasted without releasing full energy.
CO2тАЛ is the product of complete carbon oxidation.
Excess oxygen is required to ensure complete combustion and minimize CO formation.
Smoking chimneys (Option A) occur due to unburnt carbon particles (soot), which is also a sign of incomplete combustion, but CO measurement is the standard analytical indicator.
Maximizes thermal efficiency
Reduces environmental emissions
CO is highly toxic
Energy loss due to partial oxidation
Boiler furnace monitoring
Internal combustion engine tuning
High CO2тАЛ is generally a sign of good combustion efficiency as it implies oxygen was sufficient for complete conversion.
Option A (smoking exhaust) is a visual indicator of soot/particulates, but CO is the primary chemical indicator of gaseous incomplete combustion.
C is correct тАФ High CO content in flue gases at exit indicates that carbon has not fully oxidized to CO2тАЛ due to insufficient oxygen or improper mixing.
In combustion analysis, always look for the relationship between the flue gas composition and the stoichiometric air requirement; high CO2тАЛ is desirable while high CO is the primary indicator of loss.