Join 60,000+ competitive exam aspirants
The pumped storage scheme is employed to supply
During the peak hours
During the off-peak hours
System base load
None of above
During the peak hours
A Pumped Storage Plant (PSP) acts as an energy storage system that consumes surplus electrical energy during off-peak hours to pump water to an upper reservoir. This stored potential energy is then converted back into electrical energy by releasing the water through turbines during peak demand hours to stabilize the grid.
A Pumped Storage Plant (PSP) acts as an energy storage system that consumes surplus electrical energy during off-peak hours to pump water to an upper reservoir. This stored potential energy is then converted back into electrical energy by releasing the water through turbines during peak demand hours to stabilize the grid.
EstoredтАЛ=mтЛЕgтЛЕh
╬╖roundtripтАЛ=EpumpтАЛEgenтАЛтАЛ├Ч100%
The plant operates in two modes: (1) Pumping mode: During low demand, base-load power (thermal or nuclear) is used to pump water from a lower reservoir to an upper reservoir. (2) Generating mode: During peak demand, the stored water is released to drive hydraulic turbines, providing rapid, reliable peaking power.
Functions as a load during off-peak and a generator during peak hours.
Provides high operational flexibility and rapid start-up times.
Helps in frequency regulation and grid stability.
Depends on the round-trip efficiency, typically around 70-80%.
Excellent for peak load shaving.
Provides black-start capability.
Rapid response to sudden load changes.
High capital cost for site construction.
Subject to efficiency losses (round-trip energy loss).
Geographical dependency for reservoir locations.
Peak load management in large power grids.
Energy storage for intermittent renewable sources (Solar/Wind integration).
Pumped storage is the largest form of grid-scale energy storage currently in operation worldwide.
Option B (Off-peak) is incorrect as the plant acts as a consumer/load during this time, not a supplier to the grid.
A is correct тАФ Pumped storage schemes operate by releasing stored hydraulic energy to generate electricity specifically to meet peak load demands.
Always remember: in Pumped Storage, the 'pump' cycle happens during off-peak (load) and the 'generation' cycle happens during peak (source).