Join 60,000+ competitive exam aspirants
The purpose of the moderator in a nuclear power plant is to
Control the flow of water inlet
Control the amount of nuclear fuel into the reactor
Control the nuclear fission or fission rate by slowing down the neutrons
Control the steam flow to the turbine
Control the nuclear fission or fission rate by slowing down the neutrons
A moderator is a medium used in a nuclear reactor to reduce the kinetic energy of fast neutrons produced by fission. By slowing these 'fast' neutrons down to 'thermal' (low-energy) levels, the probability of them inducing further fission in U235 nuclei is significantly increased.
A moderator is a medium used in a nuclear reactor to reduce the kinetic energy of fast neutrons produced by fission. By slowing these 'fast' neutrons down to 'thermal' (low-energy) levels, the probability of them inducing further fission in U235 nuclei is significantly increased.
EthermalтАЛтЙИ23тАЛkBтАЛT
╧ГfтАЛтИЭv1тАЛ
Nuclear fission releases neutrons with high kinetic energies (approx. 2 MeV). These fast neutrons are inefficient at sustaining a chain reaction because they often escape the fuel or are captured by U238 without causing fission. The moderator consists of light nuclei (like Hydrogen in water or Carbon in graphite) that absorb kinetic energy through elastic collisions, bringing the neutrons to thermal equilibrium (approx. 0.025 eV), where the fission cross-section is much higher.
Moderators must have a low atomic mass to maximize energy loss per collision.
Common materials include Light Water (H2тАЛO), Heavy Water (D2тАЛO), and Graphite.
A good moderator should have a low neutron absorption cross-section to avoid wasting neutrons.
The process of slowing down neutrons is termed 'thermalization'.
Increases the efficiency of the chain reaction in U235 fuel.
Allows the use of naturally occurring or low-enriched uranium.
Requires high volume and specific structural integrity for containment.
Adds complexity to reactor cooling and heat transfer designs.
Pressurized Water Reactors (PWR)
Boiling Water Reactors (BWR)
Pressurized Heavy Water Reactors (PHWR)
Option A refers to the coolant system flow.
Option B refers to control rods or fuel loading mechanisms.
Option D refers to the steam cycle/secondary loop operation.
C is correct тАФ The moderator slows down fast neutrons to thermal speeds to increase the probability of sustaining a stable nuclear chain reaction.
Remember that 'Moderator' slows neutrons, while 'Control Rods' (e.g., Boron, Cadmium) absorb them to shut down or regulate the total power level of the reactor.