Join 60,000+ competitive exam aspirants
The rated voltage is depicted in __________ and used __________ voltage for the three-phase circuit.
kVrms, phase to phase
kVrms, phase to Neutral
kVpeak, phase to phase
kVpeak, phase to Neutral
kVrms, phase to phase
In alternating current (AC) power engineering, three-phase systems are universally specified by their root-mean-square (RMS) line-to-line (phase-to-phase) voltage values. Therefore, a rated voltage specification such as 11┬аkV or 400┬аV inherently means 11┬аkVrmsтАЛ or 400┬аVrmsтАЛ measured between any two line conductors.
IS 12360:1988 / IEC 60038 (Standard Voltages)
In alternating current (AC) power engineering, three-phase systems are universally specified by their root-mean-square (RMS) line-to-line (phase-to-phase) voltage values. Therefore, a rated voltage specification such as 11┬аkV or 400┬аV inherently means 11┬аkVrmsтАЛ or 400┬аVrmsтАЛ measured between any two line conductors.
VlineтАЛ=3тАЛ├ЧVphaseтАЛ тАФ Relationship between line-to-line voltage and phase-to-neutral voltage in a balanced star connection
VrmsтАЛ=2тАЛVpeakтАЛтАЛ тАФ Relationship between RMS voltage and peak voltage for a sinusoidal waveform
P=3тАЛ├ЧVLтАЛ├ЧILтАЛ├Чcos╧Х тАФ Total active power in a balanced three-phase circuit using line quantities
Equipment insulation and power delivery calculations in a three-phase system are standardized based on line-to-line voltage levels to ensure uniform rating across transformers, switchgear, and transmission lines. RMS values are used because they represent the equivalent DC heating value of the alternating voltage waveform.
Standard system nominal voltages (e.g., 415┬аV, 11┬аkV, 33┬аkV, 132┬аkV, 400┬аkV) always represent RMS line-to-line values unless explicitly mentioned otherwise.
Root Mean Square (RMS) value is used because AC equipment ratings are based on thermal/heating limits (P=Irms2тАЛR).
Line-to-line voltage representation provides a uniform specification independent of winding connection (Star or Delta).
RMS representation directly reflects the power delivery capacity of the system.
Peak voltage (VpeakтАЛ) is higher by a factor of 2тАЛ, which must be considered separately for insulation breakdown design.
Rating of switchgear, circuit breakers, isolators, and transformers.
Transmission line and distribution feeder voltage classification.
Option B (kVrms, phase to Neutral) is incorrect because phase-to-neutral voltage is designated as phase voltage (VphтАЛ), not system rated voltage.
Options C and D are incorrect because peak voltage (VpeakтАЛ) is not used for system nameplate rating; RMS value is the standard metric.
A is correct тАФ Rated voltage for a three-phase circuit is expressed in kVrms and represents the phase-to-phase (line-to-line) voltage.
In numerical problems involving power calculations (P=3тАЛVLтАЛILтАЛcos╧Х), always substitute the given system voltage directly as VLтАЛ (VlineтАЛ) in RMS unless specifically specified as phase voltage.