Join 60,000+ competitive exam aspirants
The saving in Cu achieved by converting a 2-winding transformer into an auto transformer is determined by
voltage transformation ratio (K)
load on the secondary
magnetic quality of core material
size of the transformer core
voltage transformation ratio (K)
The saving in copper (Cu) achieved by converting a 2-winding transformer into an autotransformer depends primarily on the voltage transformation ratio (K) because this ratio dictates the portion of winding shared between the primary and secondary, reducing the overall copper requirement.
The saving in copper (Cu) achieved by converting a 2-winding transformer into an autotransformer depends primarily on the voltage transformation ratio (K) because this ratio dictates the portion of winding shared between the primary and secondary, reducing the overall copper requirement.
K=U1тАЛU2тАЛтАЛ тАФ voltage transformation ratio
IprimaryтАЛ=KтЛЕIsecondaryтАЛ тАФ current relationship between primary and secondary
In an autotransformer, a single winding acts as both the primary and secondary, allowing for a reduction in the amount of copper needed compared to a traditional transformer, where separate windings are required. The ratio of the voltages, or the voltage transformation ratio (K), effectively determines how much of the winding is utilized for the transformation, impacting the overall copper savings.
Autotransformers save copper by using fewer windings than traditional transformers.
The voltage transformation ratio (K) is crucial in determining the efficiency and copper savings.
Reduced material costs due to less copper.
Improved efficiency because of lower losses.
Lack of electrical isolation between primary and secondary circuits.
Less flexible in voltage adjustment compared to two-winding transformers.
Voltage regulation in power networks.
Starting and speed control of motors.
Standard values for copper savings can be significant, often exceeding 50%.
Option B is incorrect because the load on the secondary does not directly affect the copper savings; rather, it influences the current and not the winding configuration.
A is correct тАФ the voltage transformation ratio (K) determines the shared winding length and thus influences the amount of copper used.
Understanding the basic structure and function of both autotransformers and conventional transformers is vital for electrical exams.