Join 60,000+ competitive exam aspirants
The torque causing the rotation of a rotor is due to the
Drag force
Gravitational force
Lift force
Axial thrust
Lift force
The rotation of a wind turbine rotor is primarily driven by the lift force generated by the airfoil-shaped blades. As wind flows over these blades, a pressure difference is created between the suction side and the pressure side, resulting in a net force perpendicular to the incoming wind direction (lift), which generates the torque required for rotation.
The rotation of a wind turbine rotor is primarily driven by the lift force generated by the airfoil-shaped blades. As wind flows over these blades, a pressure difference is created between the suction side and the pressure side, resulting in a net force perpendicular to the incoming wind direction (lift), which generates the torque required for rotation.
T=LтЛЕRтЛЕcos(╬▒) тАФ Torque produced by the lift force component acting at a radius R
L=21тАЛтЛЕ╧БтЛЕv2тЛЕAтЛЕCLтАЛ тАФ Lift force equation where CLтАЛ is the lift coefficient
When wind passes over the airfoil, the velocity on the curved upper side is higher than on the lower side, leading to lower pressure according to Bernoulli's principle. This pressure differential results in a lift force L. The component of this lift force acting tangentially to the rotor plane produces the driving torque T=L├ЧR├Чsin(╬╕), where R is the rotor radius.
Lift-based turbines (like HAWTs) are far more efficient than drag-based turbines.
The lift force acts perpendicular to the relative wind velocity vector.
Drag force opposes rotation and acts in the direction of the relative wind.
Aerodynamic stall occurs when the angle of attack exceeds the critical limit, reducing lift.
High efficiency in converting wind energy to mechanical energy
High tip speed ratio capability
Requires high wind speeds for startup
Complex blade aerodynamic design required
Utility-scale Horizontal Axis Wind Turbines (HAWTs)
Aerodynamic propellers for aircraft
Drag force typically acts in the direction of airflow and is the primary driving force in Savonius-type vertical axis turbines, which are much less efficient than lift-based designs.
Option D (Axial thrust) is the force acting parallel to the rotor axis, which causes structural stress rather than rotational torque.
C is correct тАФ The torque causing the rotation of a rotor is due to the lift force generated by the airfoil-shaped blades.
In wind energy exams, always remember that 'Lift' implies high-efficiency HAWT design, whereas 'Drag' implies low-efficiency, high-starting-torque designs like Savonius turbines.