Join 60,000+ competitive exam aspirants
The velocity of traveling wave through a cable of relative permittivity 9 is
9├Ч108 m/s
3├Ч108 m/s
2├Ч108 m/s
108 m/s
108 m/s
The velocity of a traveling electromagnetic wave in a dielectric medium is given by the speed of light in vacuum divided by the square root of the relative permittivity (dielectric constant) of the medium. For a cable with relative permittivity (╧╡rтАЛ) of 9, the velocity is calculated as v=╧╡rтАЛтАЛcтАЛ, where c is the speed of light in vacuum (3├Ч108 m/s).
The velocity of a traveling electromagnetic wave in a dielectric medium is given by the speed of light in vacuum divided by the square root of the relative permittivity (dielectric constant) of the medium. For a cable with relative permittivity (╧╡rтАЛ) of 9, the velocity is calculated as v=╧╡rтАЛтАЛcтАЛ, where c is the speed of light in vacuum (3├Ч108 m/s).
v=╧╡rтАЛтАЛcтАЛ тАФ Velocity of wave in dielectric
c=╬╝0тАЛ╧╡0тАЛтАЛ1тАЛтЙИ3├Ч108 m/s тАФ Speed of light in vacuum
Electromagnetic waves propagate through insulation material based on the permittivity and permeability of the dielectric. Since cables have a non-magnetic insulating material, the velocity depends inversely on the square root of the dielectric constant. As ╧╡rтАЛ increases, the velocity of the traveling wave decreases compared to the speed of light in free space.
The velocity of a traveling wave is inversely proportional to the square root of the relative permittivity of the insulating material.
For vacuum or air, ╧╡rтАЛ=1, so the velocity is equal to the speed of light (c).
In underground cables, the presence of insulation (oil-impregnated paper, XLPE, etc.) significantly reduces the wave speed below c.
Helps in fault location using reflectometry (TDR).
Determines wave travel time between substations.
High dielectric constants cause increased time delay for signals.
Higher relative permittivity leads to higher charging currents in cables.
Time Domain Reflectometry (TDR) for fault location.
Transient analysis in power systems.
Communication signal propagation in coaxial cables.
Calculation: v=9тАЛ3├Ч108тАЛ=33├Ч108тАЛ=108 m/s.
Option A is incorrect as it represents 3c, which is physically impossible. Option B corresponds to the velocity in air/vacuum. Option C is a common distracter assuming ╧╡rтАЛтАЛ equals 1.5 instead of 3.
D is correct тАФ The velocity of the wave is 108 m/s because v=9тАЛ3├Ч108тАЛ=108 m/s.
Remember that wave velocity in transmission lines is always less than the speed of light in vacuum because for all practical insulation materials, ╧╡rтАЛ>1.