Join 60,000+ competitive exam aspirants
The voltage applied to the h.v. side of a transformer during the short-circuit test is 2% of its rated voltage. The core loss will be.......percent of the rated core loss.
02
04
04
During a short-circuit test of a transformer, the applied voltage on the high voltage side is 2% of the rated voltage. Under these conditions, the core loss will be 4% of the rated core loss, as core losses are primarily dependent on the applied voltage squared.
During a short-circuit test of a transformer, the applied voltage on the high voltage side is 2% of the rated voltage. Under these conditions, the core loss will be 4% of the rated core loss, as core losses are primarily dependent on the applied voltage squared.
PcoreтАЛтИЭV2 тАФ Represents the relation of core loss to voltage.
Core loss in a transformer mainly consists of hysteresis and eddy current losses. These losses are governed by the properties of the core material and the magnetizing current, which is proportional to the applied voltage. Hence, when the applied voltage is significantly reduced, the core loss reduces according to the square of this voltage ratio, resulting in a loss of 4% at 2% input voltage.
Core loss is primarily dependent on the applied voltage.
At reduced voltage, core losses decrease in a quadratic manner.
Helps evaluate the performance of transformers under faulty conditions.
Informs adjustment of transformer design for improved efficiency.
Short-circuit tests can lead to overheating if not managed.
Not all losses are considered, focusing only on core losses.
Used in the testing phase of transformer design.
Essential for maintaining transformer operational standards in power systems.
Standard value for core loss during short-circuit tests varies across designs.
Option A is incorrect, as it does not acknowledge the relationship between voltage and core loss.
D is correct тАФ Core loss at 2% voltage results in 4% of rated core loss as per the voltage squared relationship.
Always remember, for transformers, core losses scale with the square of voltage, while copper losses depend on the load current.