Join 60,000+ competitive exam aspirants
Tip speed of a wind turbine rotor of radius 20 m and speed of 30 RPM is
30 m/s
60 m/s
120 m/s
200 m/s
60 m/s
B is correct because the calculated tip speed v=20×π rad/s results in approximately 60 m/s.
Radius of wind turbine rotor R = 20 m, angular speed N = 30 RPM
v=R×ω=R×602πN
Convert RPM to Angular Velocity
Convert angular speed from RPM (revolutions per minute) to rad/s using the conversion factor ω=602πN.
ω=602×π×30=π rad/s
Apply Tip Speed Formula
The linear tip speed v is given by the product of radius R and angular velocity ω.
v=R×ω
Calculate Final Value
Substitute R=20 m and ω=π≈3.14 rad/s into the equation. Note: Using π≈3 for estimation as per common competitive exam standards.
v=20×π≈20×3.14159≈62.8 m/s≈60 m/s
B is correct because the calculated tip speed v=20×π rad/s results in approximately 60 m/s.
In wind power engineering, the ratio of the tip speed to the wind speed is known as the Tip Speed Ratio (TSR), which is a critical design parameter for rotor efficiency.