Join 60,000+ competitive exam aspirants
Two single-phase transformers A and B are operating in parallel with the same pu impedance and different x/r ratios. Then the total kVA output of both the transformer will be
< (A+B)
(A+B)
= (A+B)
= (A+B)/2
< (A+B)
When two single-phase transformers A and B are connected in parallel with the same per unit (pu) impedance and different reactance-to-resistance (x/r) ratios, the total output kVA will be less than the sum of their individual outputs due to the effect of the x/r ratio on load sharing. Hence, the total kVA output is represented by option A, which states it is less than (A+B).
When two single-phase transformers A and B are connected in parallel with the same per unit (pu) impedance and different reactance-to-resistance (x/r) ratios, the total output kVA will be less than the sum of their individual outputs due to the effect of the x/r ratio on load sharing. Hence, the total kVA output is represented by option A, which states it is less than (A+B).
TotalOutput=A+B<=>A+BтИТLosses тАФ represents the total output considering losses due to load sharing.
ZeqтАЛ=ZAтАЛтИгтИгZBтАЛ тАФ represents the equivalent impedance seen by the load.
The kVA output of transformers in parallel is influenced by their impedance and x/r ratios. The transformer with a lower x/r ratio tends to carry a larger share of the load, leading to uneven load distribution. This unequal sharing causes the overall kVA rating to drop below the simple sum of the individual transformers' ratings.
Transformers in parallel must have the same voltage rating and phase sequence.
Unequal sharing of load can occur if transformers have different x/r ratios.
Increased reliability of the power supply.
Flexibility in load management through paralleling.
Unbalanced load may lead to overheating.
Complexity in protection coordination.
Industrial power distribution systems.
Large-scale renewable energy integration.
Standard transformer connection practices must be followed for optimal performance.
Wrong options explanation (e.g. Option B is incorrect because total output cannot exceed the individual outputs due to impedance mismatches).
A is correct тАФ the total kVA output is less than the sum of the individual outputs due to the different x/r ratios affecting load sharing.
When dealing with transformer circuits in exams, pay careful attention to load sharing principles, especially under conditions of parallel operation.