Join 60,000+ competitive exam aspirants
Two transformers with identical ratings are designed with flux densities of 1.2 and 1.4 Wb/m┬▓ respectively. The weight of the first transformer per KVA is
less than that of the second transformer.
equal to that of the second transformer.
more than that of the second transformer.
None of these.
more than that of the second transformer.
The weight of a transformer core is inversely proportional to its working flux density BmтАЛ for a fixed power rating. A transformer designed with a lower flux density requires a larger core cross-sectional area to sustain the same induced voltage, resulting in a heavier structure.
The weight of a transformer core is inversely proportional to its working flux density BmтАЛ for a fixed power rating. A transformer designed with a lower flux density requires a larger core cross-sectional area to sustain the same induced voltage, resulting in a heavier structure.
E=4.44fNABmтАЛ тАФ Transformer EMF equation
WeightтИЭA├ЧlтИЭBmтАЛ1тАЛ тАФ Inverse relation between weight and flux density
The transformer EMF equation is E=4.44fNABmтАЛ. For a constant voltage E and frequency f, the product of area A and flux density BmтАЛ is constant (AтЛЕBmтАЛ=K). Thus, AтИЭBmтАЛ1тАЛ. Since the weight of the transformer is dominated by the volume of the magnetic core (Volume=Area├ЧLength), a smaller BmтАЛ necessitates a larger A, leading to higher core weight.
Lower flux density requires a larger core cross-sectional area for the same voltage.
Larger core area implies greater volume and hence higher weight of core material.
Higher weight typically increases the total cost and footprint of the transformer.
Modern transformers use higher flux densities to reduce size and weight, limited only by core saturation.
Lower flux density reduces hysteresis losses
Lower flux density operates the core far from the saturation region
Increased weight and material usage
Higher production cost due to more iron material
Power distribution systems
Specialized magnetic devices where low saturation is required
| Feature | Transformer 1 | Transformer 2 |
|---|---|---|
Flux Density (BmтАЛ) | 1.2 Wb/m2 | 1.4 Wb/m2 |
Core Area (A) | Larger | Smaller |
Relative Weight | More | Less |
The standard unit of flux density is Tesla (T) or Wb/m2.
Option B is incorrect because weight depends directly on the core material volume, which varies inversely with BmтАЛ.
C is correct тАФ Since the cross-sectional area required is inversely proportional to the flux density, the transformer with the lower flux density (1.2 Wb/m2) needs a larger core area and is therefore heavier.
Remember that in machine design, parameters like weight and volume are generally inversely proportional to the flux density (BmтАЛ) or current density (J).