Join 60,000+ competitive exam aspirants
Usual blade diameter of wind turbine is
25 m
70 m
100 m
150 m
25 m
Wind turbines are categorized by their rotor diameter based on power rating and site conditions. Small to medium-scale wind turbines, often used in decentralized or early industrial installations, typically feature rotor diameters in the range of 20 to 30 meters.
Wind turbines are categorized by their rotor diameter based on power rating and site conditions. Small to medium-scale wind turbines, often used in decentralized or early industrial installations, typically feature rotor diameters in the range of 20 to 30 meters.
P=21тАЛ╧БAv3CpтАЛ тАФ Power extracted from wind
A=╧АR2 тАФ Swept area of the turbine blades
The wind turbine converts the kinetic energy of the wind into mechanical energy by using aerodynamic blades. The power output P is directly proportional to the swept area A=╧Аr2, where r is the blade radius. Therefore, a blade diameter of 25m (radius 12.5m) corresponds to a moderate power output suitable for regional grids or off-grid applications.
The swept area determines the total energy capture potential.
Smaller blade diameters (20-30m) are characteristic of 250kW to 750kW capacity turbines.
Modern utility-scale turbines have diameters exceeding 100m to capture more kinetic energy at lower wind speeds.
Lower structural weight and foundation costs.
Easier transportation and logistics for blades.
Lower visual and noise impact in some terrains.
Lower power output compared to massive offshore turbines.
Higher cost per unit of electricity generated (LCOE) compared to larger modern units.
Local grid supply
Rural electrification
On-site industrial wind power
While 25m was standard for older, smaller turbines, modern utility-scale wind farms now commonly use turbines with diameters between 100m and 150m for higher efficiency.
Option B, C, and D represent large-scale multi-megawatt turbines which are standard in modern offshore and large land-based wind farms.
A is correct тАФ A 25 m blade diameter is characteristic of small-to-mid-scale wind turbine installations.
Always relate the physical size (swept area) to the cube of the wind velocity (v3) when calculating power output, as PтИЭv3 is a critical dependency in power systems engineering.