Join 60,000+ competitive exam aspirants
Usual efficiency of wind power plant ranges between
10 тАУ 12%
18 тАУ 20%
50 тАУ 70%
80 тАУ 90%
50 тАУ 70%
Wind power plants typically operate with an efficiency ranging from 50% to 70% of the theoretical Betz limit, when considering the overall system efficiency including mechanical and electrical conversion. The theoretical maximum efficiency of a wind turbine itself, known as the Betz limit, is 59.3%.
Wind power plants typically operate with an efficiency ranging from 50% to 70% of the theoretical Betz limit, when considering the overall system efficiency including mechanical and electrical conversion. The theoretical maximum efficiency of a wind turbine itself, known as the Betz limit, is 59.3%.
PwтАЛ=21тАЛ╧БAv3 тАФ Kinetic power available in wind
PoutтАЛ=21тАЛ╧БAv3CpтАЛ╬╖gтАЛ тАФ Actual electrical power output
Wind turbines convert the kinetic energy of air (wind) into rotational mechanical energy using aerodynamic blades. This rotation drives an induction or synchronous generator to produce electrical energy. Efficiency is dictated by the power coefficient (CpтАЛ), which measures the fraction of kinetic energy extracted from the wind, compounded by gear losses and generator electrical losses.
The Betz Limit (59.3%) represents the maximum possible energy extraction from an open-flow wind stream.
Efficiency in real-world scenarios accounts for drag, tip losses, and generator conversion losses.
The power extracted is proportional to the cube of the wind velocity (v3).
Renewable and inexhaustible energy source
Zero greenhouse gas emissions during operation
Intermittent energy availability
High initial capital investment
Grid-connected wind farms
Standalone off-grid systems for rural electrification
While 59.3% is the aerodynamic limit (Betz limit), total system efficiency often fluctuates based on wind speed and the specific generator design.
Option D (80-90%) is typical of large industrial transformers, not wind energy conversion systems.
C is correct тАФ The efficiency of a wind power plant is primarily constrained by the Betz limit and mechanical-electrical conversion losses, generally falling within the 50% to 70% range.
Always remember that wind power depends on v3; even small changes in wind velocity lead to large changes in generated power, affecting efficiency calculations at different site locations.