Join 60,000+ competitive exam aspirants
Water pumping windmills have
More number of blades than wind turbine
Same number of blades as wind turbine
Less number of blades than wind turbine
None of above
More number of blades than wind turbine
Water pumping windmills typically use a multi-blade design (often 12 to 24 blades) to generate high starting torque at low wind speeds. In contrast, modern electricity-generating wind turbines use fewer blades (usually 3) designed for high rotational speed and aerodynamic efficiency.
Water pumping windmills typically use a multi-blade design (often 12 to 24 blades) to generate high starting torque at low wind speeds. In contrast, modern electricity-generating wind turbines use fewer blades (usually 3) designed for high rotational speed and aerodynamic efficiency.
╬╗=v╧ЙRтАЛ тАФ Tip Speed Ratio representing the ratio of blade tip speed to wind speed
╧Д=CtтАЛтЛЕ21тАЛ╧БAv2R тАФ Torque equation showing dependence on torque coefficient CtтАЛ
The design of a wind machine is governed by the tip speed ratio (TSR), defined as ╬╗=v╧ЙRтАЛ, where ╧Й is angular velocity, R is blade radius, and v is wind speed. High-torque, low-speed machines like water pumps require a high solidity (ratio of blade area to swept area) to maximize force on the blades at low velocity, which necessitates more blades. Electricity-generating turbines are designed for high ╬╗ to maximize power extraction efficiency, requiring lower solidity and fewer blades to minimize drag and turbulence.
Water pumping windmills prioritize starting torque over rotational speed.
Higher blade count (solidity) provides the necessary starting torque to initiate pumping from a dead stop.
Electricity generation turbines prioritize high rotational speeds for efficient generator coupling.
Low-solidity rotors (2-3 blades) are preferred for electricity generation due to reduced blade drag.
High starting torque allows pumping in very low wind conditions
Mechanically robust and simple construction for rural reliability
Low rotational speed is inefficient for standard AC electrical generation
High blade count leads to higher manufacturing costs and material usage
Rural water supply
Irrigation systems
Livestock watering
| Feature | Water Pump | Wind Turbine |
|---|---|---|
Blade Count | 12-24 blades | 2-3 blades |
Primary Goal | High Starting Torque | High Rotational Speed |
Solidity is the ratio of the total projected blade area to the area of the wind circle.
Options B and C are incorrect because they fail to account for the fundamental requirement of high torque versus high power-extraction efficiency.
A is correct тАФ Water pumping windmills employ a high number of blades to achieve high starting torque required to move heavy mechanical pump loads at low wind speeds.
Always relate the 'Load' type to the 'Machine' characteristics; high-friction mechanical loads (like pumps) almost always demand high-torque, low-speed machines.