Join 60,000+ competitive exam aspirants
When AC voltage is applied to the line, the line capacitance draws
Leading sinusoidal current
Lagging sinusoidal current
A current in phase with voltage
None of above
Leading sinusoidal current
When an AC voltage is applied to a transmission line, the capacitance existing between the conductors and the ground (or between conductors) acts as a shunt capacitive load. Because capacitors in an AC circuit draw current that leads the applied voltage by 90┬░, the line draws a leading sinusoidal current.
When an AC voltage is applied to a transmission line, the capacitance existing between the conductors and the ground (or between conductors) acts as a shunt capacitive load. Because capacitors in an AC circuit draw current that leads the applied voltage by 90┬░, the line draws a leading sinusoidal current.
IcтАЛ=j╧ЙCV тАФ Phasor representation of capacitive current
XcтАЛ=2╧АfC1тАЛ тАФ Capacitive reactance
The current in a capacitor is defined by the relationship I=CdtdVтАЛ. For a sinusoidal voltage V=VmтАЛsin(╧Йt), the derivative results in a cosine term, I=╧ЙCVmтАЛcos(╧Йt)=╧ЙCVmтАЛsin(╧Йt+90┬░). Thus, the capacitive reactance inherent in the geometry of the transmission line causes the current to phase-shift lead the voltage by an ideal 90┬░.
Line capacitance is a shunt parameter distributed along the line length.
This phenomenon is the primary cause of the Ferranti effect in lightly loaded or open-circuited long transmission lines.
Leading current provides reactive power (VAR) compensation to the system.
Helps in improving voltage profile in long lines during light load conditions.
Provides reactive power support to the grid.
Causes rise in receiving end voltage (Ferranti effect) when load is removed.
May lead to overvoltage stress on insulation at no-load.
Shunt compensation planning
Transmission line voltage regulation studies
Option B (Lagging current) is the characteristic of inductive loads like motors or transformers.
Option C (In-phase current) is the characteristic of purely resistive loads.
The charging current magnitude is directly proportional to line voltage and frequency.
A is correct тАФ Transmission line capacitance behaves as a shunt capacitor, drawing a current that leads the applied voltage by 90┬░.
Always remember the mnemonic 'ELI the ICE man': in an Inductor (L), E leads I; in a Capacitor (C), I leads E.