Join 60,000+ competitive exam aspirants
Which material is used in controlling chain reaction in a nuclear reactor?
Thorium
Heavy water
Boron
Beryllium
Boron
In a nuclear reactor, control rods are used to manage the fission rate by absorbing excess neutrons. Materials with a high neutron absorption cross-section, such as Boron, Cadmium, or Hafnium, are used for this purpose.
In a nuclear reactor, control rods are used to manage the fission rate by absorbing excess neutrons. Materials with a high neutron absorption cross-section, such as Boron, Cadmium, or Hafnium, are used for this purpose.
k=PpreviousтАЛPnewтАЛтАЛ тАФ Multiplication factor
10B+nтЖТ7Li+╬▒+2.79MeV тАФ Neutron capture reaction
The chain reaction is governed by the effective neutron multiplication factor (k). If k>1, the reaction is supercritical; if k<1, it is subcritical. Control rods containing Boron are inserted or withdrawn from the reactor core to adjust the neutron population, ensuring k=1 for a steady-state operation. Boron-10, specifically, captures neutrons through the reaction: 10B+nтЖТ7Li+4He+╬│.
Boron acts as a neutron poison due to its high capture cross-section.
Control rods maintain the reactor at critical state (k=1).
Heavy water is a moderator, not a control rod material.
Beryllium is primarily used as a neutron reflector.
High efficiency in neutron absorption.
Allows precise control of reactor power output.
Control rods eventually deplete their absorbing capability.
Generates significant heat within the rods themselves during operation.
Nuclear Power Plants (PWR/BWR).
Research reactors for flux control.
Heavy Water (D2тАЛO) is used as a moderator to slow down fast neutrons, not to stop the chain reaction.
Thorium is a fertile fuel source, used to breed U233 in reactors.
Beryllium is used to reflect neutrons back into the core to improve efficiency.
C is correct тАФ Boron is used as a control rod material because its high neutron absorption cross-section allows it to effectively capture neutrons and control the fission rate.
Always distinguish between moderators (which slow neutrons, like heavy water/graphite) and control rods (which absorb neutrons, like boron/cadmium) in power system conventional generation topics.