Join 60,000+ competitive exam aspirants
Which of the following components can not be used as a ground electrode system?
Metal frame of buildings or structures
Ground ring
Concrete-encased electrodes
Metal underground gas piping system
Metal underground gas piping system
According to the National Electrical Code (NEC), metal underground gas piping is strictly prohibited from being used as a grounding electrode. This is because gas pipes are susceptible to corrosion, potential leakage, and the risk of igniting gas due to electrical sparks or fault currents passing through the pipe.
According to the National Electrical Code (NEC), metal underground gas piping is strictly prohibited from being used as a grounding electrode. This is because gas pipes are susceptible to corrosion, potential leakage, and the risk of igniting gas due to electrical sparks or fault currents passing through the pipe.
RgтАЛ=╧Б2╧АrLтАЛ тАФ Resistance of a grounding electrode in a uniform medium
IfтАЛ=ZtotalтАЛVтАЛ тАФ Fault current flowing through the grounding system
A grounding electrode must provide a permanent, low-impedance path to the earth to dissipate fault currents safely. While metal structures and concrete-encased electrodes (Ufer grounds) provide a stable, continuous, and chemically inert connection to the earth, gas piping systems are designed for fluid transport and often contain insulating couplings, gaskets, or non-conductive materials that disrupt electrical continuity, posing significant explosion hazards.
Grounding electrodes must ensure continuity and corrosion resistance.
Gas pipes contain potential leak points and insulating seals that break electrical paths.
Using gas pipes for grounding introduces a risk of fire or explosion.
Concrete-encased electrodes use the rebar or copper conductor within the foundation footing as an effective earth contact.
Stable electrical reference for system protection
Effective dissipation of lightning and surge currents
High cost of installing deep-earth grounding systems
Potential for electrolytic corrosion if materials are not compatible
Domestic wiring
Industrial power substations
Telecommunication centers
NEC Article 250.52 specifies the required grounding electrodes.
Option A, B, and C are recognized as safe, effective grounding methods per electrical standards.
Even if a gas pipe is metal, its primary function and susceptibility to damage override its conductivity for safety purposes.
D is correct тАФ metal underground gas piping is explicitly forbidden by safety codes to be used as a grounding electrode due to fire and explosion risks.
Always remember that grounding components must be selected for both electrical conductivity and mechanical/chemical safety; never assume that any buried metal is a valid grounding electrode.