Join 60,000+ competitive exam aspirants
Which of the following power plants operate on low speed?
Hydro
Steam
Nuclear
Gas turbine
Hydro
Hydroelectric power plants typically operate at low speeds (often 100-500 RPM) because they utilize large-diameter, multi-pole salient pole synchronous generators driven by water turbines. In contrast, thermal, nuclear, and gas turbine plants use high-speed cylindrical rotor generators that rotate at 1500 or 3000 RPM to match the thermal cycle efficiency.
Hydroelectric power plants typically operate at low speeds (often 100-500 RPM) because they utilize large-diameter, multi-pole salient pole synchronous generators driven by water turbines. In contrast, thermal, nuclear, and gas turbine plants use high-speed cylindrical rotor generators that rotate at 1500 or 3000 RPM to match the thermal cycle efficiency.
NsтАЛ=P120fтАЛ тАФ Synchronous speed equation relating speed, frequency, and poles.
The speed of a synchronous generator is given by the formula NsтАЛ=P120fтАЛ. Since the grid frequency f is constant (50 Hz), the speed NsтАЛ is inversely proportional to the number of poles P. Hydro turbines operate efficiently at lower speeds, requiring a high number of poles (P), which dictates a large physical size for the rotor to accommodate them.
Hydro generators are salient-pole type due to their large diameter and low speed.
Thermal/Nuclear/Gas plants use cylindrical (non-salient) rotors designed for high-speed operation.
Low speed requires more poles to maintain 50 Hz output frequency.
Salient pole rotors have a large diameter and short axial length compared to cylindrical rotors.
High efficiency at partial loads for hydro turbines.
Lower mechanical stress on the turbine blades due to low rotational speed.
Requires large civil engineering structures (dams/penstocks).
High initial capital cost for construction.
Base load and peak load power generation.
Grid frequency regulation (due to quick start-up of hydro units).
| Feature | Hydro | Thermal |
|---|---|---|
Generator Type | Salient Pole | Cylindrical |
Typical Speed | 100 - 500 RPM | 1500 - 3000 RPM |
Option B, C, and D utilize steam or gas turbines, which are high-speed prime movers to achieve optimal thermodynamic cycle performance.
A 'high speed' generator (like a 2-pole thermal unit) runs at 3000 RPM at 50 Hz.
A is correct тАФ Hydro power plants utilize salient pole synchronous generators which operate at low speeds due to a large number of poles.
Always remember the NsтАЛ=120f/P relationship; if you are asked about generator size, remember that lower speed/more poles lead to a physically larger machine diameter.