Join 60,000+ competitive exam aspirants
Which of the following windings are necessary in the case of all dc machines?
closed winding
lap winding
wave winding
open type winding
closed winding
All DC machine armatures require closed-type windings to ensure a continuous path for current flow and the necessary commutation process. A closed winding forms a continuous loop that allows the armature current to be collected or supplied via brushes at fixed points on the commutator.
All DC machine armatures require closed-type windings to ensure a continuous path for current flow and the necessary commutation process. A closed winding forms a continuous loop that allows the armature current to be collected or supplied via brushes at fixed points on the commutator.
EgтАЛ=60AP╬жZNтАЛ тАФ Generated EMF in DC machine armature
A=P (for Lap) or A=2 (for Wave) тАФ Parallel paths in armature winding
In a DC machine, the armature winding must be closed to allow the induced EMF to circulate. Without a closed path, the brushes riding on the commutator segments would not be able to maintain a constant potential difference, as the path of the current must be consistent as the armature rotates through various magnetic poles. The closed nature ensures that the total voltage generated in the loops is balanced and available at the terminals.
A closed winding is essential for the commutation process.
The armature winding is typically drum-type to increase efficiency.
Lap and Wave windings are the two main sub-types of closed armature windings.
Open windings are generally used in AC machines or specific specialized high-voltage generators, not standard DC machines.
Provides a continuous path for load current.
Enables the use of stationary brushes for power extraction.
Balances the EMF induced in different parallel paths.
Complex design compared to simple open-coil designs.
Susceptible to circulating currents if winding symmetry is not maintained.
DC Generators
DC Motors
Universal Motors
Lap winding is preferred for high current, low voltage applications (A = P).
Wave winding is preferred for high voltage, low current applications (A = 2).
Option B (Lap) and C (Wave) are specific types of closed windings, not the mandatory requirement for all DC machines collectively.
A is correct тАФ All DC machines must utilize a closed-type armature winding to facilitate continuous current conduction through the commutator.
Remember: Lap winding is for 'Low Voltage, High Current' (LVHC) and Wave winding is for 'High Voltage, Low Current' (HVLC).