Join 60,000+ competitive exam aspirants
Which part of the wind turbines senses wind speed, wind direction, shaft speed and torque?
Blade
Shaft
Rotor
Controller
Controller
The controller acts as the 'brain' of the wind turbine, continuously monitoring various sensors to optimize power extraction and ensure structural safety. It processes data from anemometers (wind speed), wind vanes (direction), and speed/torque sensors to adjust the turbine's pitch, yaw, and electrical load.
The controller acts as the 'brain' of the wind turbine, continuously monitoring various sensors to optimize power extraction and ensure structural safety. It processes data from anemometers (wind speed), wind vanes (direction), and speed/torque sensors to adjust the turbine's pitch, yaw, and electrical load.
P=21тАЛ╧БAv3CpтАЛ тАФ represents the available power in wind, which the controller optimizes via CpтАЛ (Power Coefficient)
╧ЙgenтАЛ=GтЛЕ╧ЙrotorтАЛ тАФ relationship between rotor and generator speeds monitored by the controller
The controller implements control algorithms (like Proportional-Integral-Derivative) to match turbine output with environmental inputs. It reads analog/digital signals from sensors, compares them against set points, and triggers actuators for yawing (to face the wind) or pitching (to regulate rotor speed). This ensures the turbine operates within safe limits, specifically avoiding cut-out speeds and mechanical stress.
The controller manages the Yaw system to optimize wind capture.
It implements pitch control to shed wind load at high speeds to protect the structure.
It monitors torque to protect the gearbox and electrical generator from overload.
Sensors include Anemometers (speed), Wind Vanes (direction), and Hall-effect or Encoder sensors (shaft speed).
Maximizes energy capture efficiency.
Protects mechanical components from extreme wind gusts.
Adds complexity and cost to the turbine system.
Susceptible to sensor calibration errors.
Utility-scale wind farms.
Offshore wind energy systems.
Cut-in speed: The minimum wind speed at which the controller starts power generation (usually 3-4 m/s).
Cut-out speed: The wind speed at which the controller shuts down the turbine to prevent damage (usually 25 m/s).
D is correct тАФ The controller serves as the central processing unit that collects input from various sensors to govern the turbine's performance and safety.
Always remember that the 'Controller' is the supervisory component, whereas 'Actuators' like the Pitch Drive and Yaw Motor are the components that actually move the parts.