Join 60,000+ competitive exam aspirants
Which power plant cannot have single unit of 100MW capacity?
Steam power plant
Nuclear power plant
Hydro electric power plant
Diesel engine power plant
Diesel engine power plant
Diesel engine power plants are generally limited to small-scale capacities (usually up to 50 MW) due to mechanical, thermal, and economic constraints inherent in internal combustion engines. Unlike steam, nuclear, or hydro plants, scaling a diesel engine to 100 MW per unit is technically inefficient and impractical compared to alternative prime movers.
Diesel engine power plants are generally limited to small-scale capacities (usually up to 50 MW) due to mechanical, thermal, and economic constraints inherent in internal combustion engines. Unlike steam, nuclear, or hydro plants, scaling a diesel engine to 100 MW per unit is technically inefficient and impractical compared to alternative prime movers.
PoutтАЛ=╬╖тЛЕPfuelтАЛ тАФ Power output related to engine efficiency
T=FтЛЕr тАФ Mechanical torque limiting large scale scaling
The principle relies on the combustion of fuel within the engine cylinders to convert chemical energy into mechanical energy, which then drives an alternator. The efficiency of a diesel engine drops significantly with size increases due to high friction losses, heat dissipation issues, and the sheer structural bulk required for high-torque moving parts, making them unsuitable for large central station generation.
Diesel plants are primarily used for peaking loads or standby emergency services.
Capital cost per kW for diesel plants increases significantly at very large scales compared to steam/nuclear.
Steam and Nuclear plants utilize large turbine sets that benefit from economies of scale, reaching unit capacities of 500MW to 1000MW+.
Hydro plants utilize high-flow water turbines that can be designed for extremely large unit outputs.
Quick starting capability (seconds to minutes)
High efficiency at partial loads
No standby losses
Ideal for remote or rural electrification
High operating cost (fuel)
Short engine life compared to steam turbines
High noise and vibration levels
Not suitable for large scale base load power
Emergency standby power for critical infrastructure
Small utility grids and isolated island electrification
Peaking load plants for electrical distribution systems
Diesel power plants are usually restricted to sizes below 50MW. Capacities of 100MW and above are typically managed via multiple smaller units rather than a single engine.
Steam and nuclear plants rely on Rankine cycle turbines capable of handling massive throughputs, easily scaling into the gigawatt range.
D is correct тАФ Diesel engine power plants are constrained by mechanical and thermodynamic limits, making single-unit capacities of 100 MW impractical compared to thermal or hydraulic alternatives.
Always remember that prime movers dictate the economic ceiling of power plant types; steam and hydro are high-capacity, whereas diesel is strictly a low-to-medium capacity solution.