Join 60,000+ competitive exam aspirants
Wind energy conversion devices based on drag force
Move faster than wind
Move slower than wind
Move with equal velocity as wind
Do not depend on the velocity of wind
Move slower than wind
Wind energy conversion devices based on drag force rely on the difference in wind pressure between the front and back surfaces of the rotor blades. Because the drag force FDтАЛ is proportional to the square of the relative velocity between the wind and the rotor, these devices must rotate slower than the wind to maintain a positive pressure differential and extract energy.
Wind energy conversion devices based on drag force rely on the difference in wind pressure between the front and back surfaces of the rotor blades. Because the drag force FDтАЛ is proportional to the square of the relative velocity between the wind and the rotor, these devices must rotate slower than the wind to maintain a positive pressure differential and extract energy.
FDтАЛ=21тАЛ╧БACDтАЛ(VwтАЛтИТVrтАЛ)2 тАФ The drag force equation
P=FDтАЛтЛЕVrтАЛ тАФ Power output of a drag-based device
The drag force FDтАЛ is defined as FDтАЛ=21тАЛ╧БACDтАЛ(VwтАЛтИТVrтАЛ)2, where VwтАЛ is the wind velocity and VrтАЛ is the velocity of the rotor. For FDтАЛ to be positive (pushing the rotor), the condition VwтАЛ>VrтАЛ must be satisfied. If VrтАЛ approaches VwтАЛ, the drag force drops to zero, limiting the theoretical efficiency and rotational speed of drag-based turbines like the Savonius rotor.
Drag-based turbines (e.g., Savonius) have lower tip-speed ratios than lift-based (aerodynamic) turbines.
The maximum power coefficient (CpтАЛ) for a pure drag device is theoretically limited to 0.16 (Betz limit for lift is 0.59).
These devices are self-starting and operate well in turbulent, low-velocity wind conditions.
High starting torque
Simple, rugged construction
Omni-directional (does not require yaw mechanism)
Lower overall efficiency
Large material requirement for large power ratings
High blade solidity
Water pumping
Small-scale anemometers
Low-power remote lighting
| Feature | Drag-based | Lift-based |
|---|---|---|
Tip Speed Ratio (TSR) | TSR < 1 | TSR > 1 |
Drag-based devices utilize the momentum transfer from air particles colliding with a surface, whereas lift-based devices (like HAWTs) utilize Bernoulli's principle.
Option A is incorrect because if the rotor moves faster than the wind, it would require energy rather than generating it.
Option C is incorrect because the relative velocity would be zero, resulting in zero drag force and zero power extraction.
B is correct тАФ Drag-based wind energy conversion devices must move slower than the wind to maintain a positive relative velocity difference required to generate drag force.
Always remember that in aerodynamic lift-based turbines (HAWTs), blades move faster than wind, whereas in simple drag-based turbines, blades move slower than wind.