Join 60,000+ competitive exam aspirants
Wind speed suitable to operate wind turbines is
5 тАУ 25 m/s
10 тАУ 35 m/s
20 тАУ 45 m/s
30 тАУ 55 m/s
5 тАУ 25 m/s
Wind turbines are designed to operate efficiently within a specific wind speed range, typically between cut-in and cut-out speeds. The range of 5тАУ25 m/s represents the practical operating window where power extraction is both feasible and safe for the mechanical structure.
Wind turbines are designed to operate efficiently within a specific wind speed range, typically between cut-in and cut-out speeds. The range of 5тАУ25 m/s represents the practical operating window where power extraction is both feasible and safe for the mechanical structure.
P=21тАЛ╧БAv3CpтАЛ тАФ Power extracted from wind, where ╧Б is air density, A is swept area, v is wind speed, and CpтАЛ is power coefficient.
A wind turbine system utilizes the kinetic energy of air moving at velocity v. The power extracted is proportional to P=21тАЛ╧БAv3CpтАЛ. The turbine starts generating power at the 'cut-in' speed (usually 3-5 m/s) and reaches its rated power within the 5тАУ25 m/s range; beyond the 'cut-out' speed (often 25 m/s), the turbine is feathered or braked to prevent structural failure due to high aerodynamic loads.
Cut-in speed: The minimum wind speed required to start the turbine and generate electricity.
Rated wind speed: The speed at which the turbine reaches its maximum rated electrical power output.
Cut-out speed: The safety threshold above which the turbine is shut down to avoid damage.
Wind power density increases with the cube of wind speed (v3).
Renewable and emission-free energy source.
Low operational cost after initial installation.
Scalable from small residential systems to large wind farms.
Intermittent nature of wind availability.
High initial capital investment for infrastructure.
Potential impact on local wildlife and landscape.
Utility-scale electricity generation for national grids.
Off-grid power supply for remote monitoring stations.
Distributed energy resources in rural areas.
The range of 5тАУ25 m/s is a standard industry guideline for modern horizontal-axis wind turbines (HAWTs).
Speeds below 5 m/s generally provide insufficient torque to overcome inertia and mechanical friction for meaningful generation.
Speeds above 25 m/s exert forces that exceed the structural design limits of the blades and gearboxes.
A is correct тАФ The standard operating range for most utility-scale wind turbines is between the cut-in speed (approx. 3-5 m/s) and the cut-out speed (approx. 25 m/s).
Remember the relationship PтИЭv3; even small changes in wind speed significantly affect power output, making accurate wind site assessment critical for power plant feasibility.