Join 60,000+ competitive exam aspirants
Wind turbine with low value of solidity
Runs slower
Runs faster
Produces higher torque
Has low efficiency
Runs faster
Solidity in wind turbines is defined as the ratio of the projected area of the blades to the area swept by the rotor. Turbines with low solidity have fewer or thinner blades, which allows them to rotate at higher speeds to maintain aerodynamic lift efficiency, making them ideal for electricity generation.
Solidity in wind turbines is defined as the ratio of the projected area of the blades to the area swept by the rotor. Turbines with low solidity have fewer or thinner blades, which allows them to rotate at higher speeds to maintain aerodynamic lift efficiency, making them ideal for electricity generation.
╧Г=RnтЛЕcтАЛ тАФ definition of solidity where n is blade count, c is chord length, and R is rotor radius
╬╗=VwтАЛ╧ЙтЛЕRтАЛ тАФ definition of tip-speed ratio where ╧Й is angular velocity and VwтАЛ is wind speed
The tip-speed ratio (TSR or ╬╗) is inversely proportional to the solidity (╧Г). As solidity decreases, the aerodynamic drag on the rotor decreases, allowing the turbine to reach a higher tip-speed ratio. High-speed operation is preferred in modern wind turbines because it enables the use of smaller, more cost-effective generators and gearboxes to produce the required frequency output.
High solidity turbines (many blades) provide high starting torque but low rotational speeds (e.g., water pumping windmills).
Low solidity turbines (1-3 blades) provide low starting torque but high rotational speeds (e.g., modern electricity-generating wind turbines).
The rotational speed ╧Й is directly related to the wind speed and the tip-speed ratio.
Higher power coefficient (CpтАЛ) at optimal operating speeds
Reduced material usage for blade construction
Lower mechanical stress on the tower due to reduced wake interference
Requires high wind speeds for self-starting
Significant noise pollution due to high tip speeds
Requires complex pitch control mechanisms
Utility-scale wind power generation
Wind farms connected to the national grid
High-speed aerodynamic energy conversion systems
| Feature | Multi-blade | 2-3 Blade |
|---|---|---|
Solidity | High Solidity | Low Solidity |
Speed | Low RPM | High RPM |
Torque | High Starting Torque | Low Starting Torque |
Low solidity designs typically have a solidity ratio of less than 0.1.
Option A is incorrect because lower solidity reduces rotor drag, allowing for higher, not lower, rotational speeds.
Option C is incorrect because high torque is a characteristic of high-solidity designs, not low-solidity designs.
B is correct тАФ Low solidity wind turbines have less blade surface area, resulting in lower drag and enabling them to operate at higher rotational speeds.
Always remember the inverse relationship between solidity and rotational speed: high solidity = high torque/low speed; low solidity = low torque/high speed.